Free shipping $99+ (excludes antennas)

CB Radios for Pickup Trucks

Posted by Pat Haggerty updated

There's no better vehicle to install a CB in than a pickup truck! Apart from the rugged good looks and functionality a nice CB install adds, the pickup offers the most options when it comes to antenna and radio mounting.   

Table of Contents

Mounting Location General Guidelines

As a general rule for all pickup antenna installations:

  • Longer = Better. The longer the antenna, the better performance you'll receive.
  • Higher = Better. The higher up you can mount antenna, the better performance you'll receive. Ideally you want at least 1/2 of the antenna above the roof line and 1/3 above the roofline at a minimum.
  • Higher Quality = Better. It may sounds obvious, but you'll get better performance (both in terms of range potential and longevity) from a well known, trusted brand. We'll mention specifics brands and model later this article. 

Center of the Roof - The Ideal Location

In terms of performance, it's hard to beat mounting an antenna in the middle of your pickup's roof. Why? This ensures it will be located at the highest point on your vehicle, which will maximize performance. It will also be installed in the middle of the truck's chassis. This serves to both minimize any directional bias (receiving signals only from one direction) as well as improve omni-directional transmit capabilities. 

For roof installations, magnet mount antennas tend to work best. If you can swing it, we'd recommend a 3' or 5' magnet mount for the top of your beloved rig.

A 3' antenna will offer a bit more clearance, while a 5' model will offer maximum range. Wilson makes our favorite magnet mount antennas. For pickups, we'd recommend the Wilson Little Wil for a 3' version and the Wilson 1000 Magnet Antenna for a 5' option.

Both antennas come with coax, mount and the antenna whip - so you'll just need a radio to complete your install. For coax routing, most people route the coax through a door frame or through the rear cab window.

Mounting to the Tool Box

Mounting an antenna to a toolbox is another extremely popular option, and can be a great choice. For toolbox mounts, most people will use a traditional 3-way mount alongside with a fiberglass antenna.

When mounting to the toolbox, make sure you use an antenna length that will clear the roofline. Again, ideally you'd like 1/2 of the antenna above the roof with a minimum of 1/3 clearing it.  If mounting just a single antenna, try to mount it on the driver's side. This will prevent the truck's cab from blocking signals coming from other drivers up and down the road.

For single antenna toolbox installs, we recommend the Firestik FS Single Antenna Kit, which includes everything you need for a high-quality toolbox install.

Toolboxes are probably the most popular spot to mount dual antenna installs, and the Firestik Dual Kit is perfect if you'd like to go that route.  Just make sure you read our article on dual CB antenna installs first.

Stakehole Mounts

If you want to mount behind the cab but don't have a toolbox - or don't want to drill into it - mounting using the stakehole is a great option. Stakeholes are the square openings along a truck's bedrails, and we offer special antenna mounts that fit into those spots - no drilling required.

A fiberglass antenna will be your best choice for a stakehole mounting location. Again, make sure to pick a length that gets at least 1/3 of the antenna above the roofline and install on the driver's side if possible for best reception from other vehicles.

We offer a few different stakehole options, including this stakehole CB mount kit and this hang-over stakehole mount.  

Hood Mounts

Mounting your antenna along the hood channel is also popular with pickup owners, and is sometimes the only option if a trailer, camper or fifth wheel makes other options impossible. If you're going for more of a factory installed looked, mounting along the hood channel probably offers the cleanest look of all the options discussed.

While we do offer a universal hood mount that will fit many vehicles, we'd recommend using our vehicle wizard to see if there's a hood mount made specifically for your make and model truck. We carry hood mounts that are designed to fit perfectly in many Ford, Chevy / GMC, Dodge and Toyota trucks.

Fiberglass antennas tend to be the best option for hood mount installs. Again, make sure to pick a length where at least 1/3 of the antenna clears the roofline for acceptable performance.

Mounting to the Bumper (Not Ideal)

The bumper tends to be a pretty poor place to mount a CB antenna on a pickup. Why? Because it's so low on the vehicle, it makes it very difficult to get the antenna high enough to provide adequate performance. Additionally, most of the antenna is blocked by the truck's cab - which prevents the antenna from sending or receiving signals to vehicles in front of the truck if mounting on the rear bumper.  

The only time we'd recommend mounting to the bumper is if you're using a 102" whip CB antenna. These monsters (discussed further below) are tall enough to clear the cab when mounted on the bumper and can be mounted there while still offering acceptable performance.

Dual Antenna Installations

It's hard to deny the appeal of dual antennas on a pickup. Apart from the potential performance increases they offer (if installed correctly), they just look downright impressive.

Dual antennas can help reduce dead spots caused by trailers, 5th wheels or anything else being hauled that could block the signal of just a single antenna. They also increase the CB's range in the direction of travel and directly behind - but limit it to the right and left.

But dual antennas are not always the best choice for a pickup. For example, a 5' magnet mount rooftop antenna will likely outperform a dual antenna install mounted lower, especially if the dual antennas are shorter.

There's a lot of variables to consider with dual antennas, so to prevent this article's length from growing longer than a 102" whip antenna, we decided to tackle them in a separate article on dual CB antenna you can read here.

Antenna Recommendations

Your choice of antenna will be strongly determined by where you want to mount it on your vehicle.  That being said, here are the types of antennas we like best for pickup trucks:

Magnet Mount Antennas

When mounted on the top of the roof, magnet mount antennas are often the best choice for overall performance. They're easy to install, too, as they include the coax, magnet mount and the whip antenna in one complete package.

Wilson makes our favorite magnet mount antennas. For a shorter option, the 3' Wilson Little Wil can't be beat. And the 5' Wilson 1000 magnet antenna will give you the best performance.

Fiberglass Antennas

For most other mounting locations on your pickup, you'll want to use a fiberglass antenna. Fiberglass antennas are durable, somewhat flexible and most importantly have a universal 3/8" x 24 thread that will connect to any of the CB antenna mounts you'll use to mount on the hood, tool box, stakehole or bumper.

Our favorite fiberglass antenna, hands-down, is the Firestik FS. It's built in the USA, performs really well and just can't be beat.

102" Whips

If you're really serious about performance, you'll want to consider using a 102" whip antenna. Because it's so long - and because its length is exactly 1/4 the length of a CB radio wave - you'll be hard pressed to find anything that rivals these beasts for transmit and receive range. You'll likely see performance that's double, triple - or even more - the performance range of even a 5' magnet mount antenna.

The downside, of course, is that you have a massive 8 1/2 foot antenna on your vehicle, which can cause some clearance issues. Also, you'll need a fairly heavy-duty mount to accommodate these whips as they are heavy and tend to torque the mount.

A ball mount is ideal for these beefy antennas, but a heavy-duty 3-way mount or dome mount can also be used.

Center Load Antennas

While some pickup drivers use a center-load CB antenna, we don't consider them ideal.

Center load antennas have the antenna coil in the middle of the antenna, and are distinguishable by the large plastic housing in the middle (as seen above). They use the same universal thread as fiberglass antennas, so they can be screwed into any of the mounts you could use with a fiberglass antenna.

Why aren't we fans for using them on pickups? First, they're significantly more expensive than fiberglass antennas (2x to 3x more).  They're also much more delicate and prone to being damaged and/or damaging your vehicle. While a fiberglass antenna has a bit of give and can work well with a spring, center load antennas have rigid, unforgiving metal lower shafts and brittle plastic housings.

Center load antennas are great for semi trucks that spend 99.9% of their time on the highways, and might work out if you'll never venture off-road or into challenging terrain. But for trucks where the antennas can get caught, snagged and abused, they're often just begging to be broken when mounted on a pickup.  

Pickup Radio Recommendations

Pickup trucks offer cab space that other vehicle owners could only dream of, and this opens up the number of radios that can be easily installed / mounted. For most pickups, installing a full-sized, full-featured CB radio is no problem - and that's what many pickup owners do.

There are loads of different radios available, and you may want to check out our complete guide to CB radios to decide which one is right for you. But if we had to recommend just one model for pickups, we'd have to go with the Cobra 29 series of radios.

Cobra 29 Series

These full-size radios are rugged, reliable work horses that work flawlessly in just about any conditions. The base model is the well-known Cobra 29 LTD, but depending on what you need it comes in models featuring backlit displays & weather, hands-free bluetooth phone operations and a snazzy LX model with a futuristic display.

Uniden 510 / 520

While most trucks have ample room to mount a full-sized CB, maybe you're not interested in something so bulky. Perhaps a massive CB is always getting in the way when your lady slides all the way across that bench seat.  No contest, there - that full sized radio has to go.

For something smaller, look no further than the Uniden 510. It's a no-frills CB in a tiny package - but it's bombproof. You could drive over washboard roads day and night for a year, and you still wouldn't get this unit to stop working.

It's small size makes it easy to mount anywhere, and it's priced significantly lower than a full-sized radio like the Cobra 29. The Uniden 520 is just like its little brother the 510, but offers PA (public address) as a feature if that's important to you.

SSB (Single Side Band) Radios

Another great option if you're looking for maximum range is a SSB-equipped radio. SSB is a feature that lets you talk at 3x the power of traditional CB radios, as long as you're communicating with other SSB operators. SSB radios also will operate on the standard CB channels, too, at regular power.

The President McKinley SSB is the most popular and trusted SSB radio on the market. It's a proven, reliable model that will offer decades of reliable, no-frills performance.

Uniden and Galaxy also offer SSB models with the Uniden 980 and Galaxy 959 if the McKinley doesn't strike your fancy.  

Mounting a CB in Your Pickup

All CB radios come with a U-shaped mounting bracket, which opens up a number of different possibilities for mounting.

The most popular place to mount a radio in pickups is on the floor or under the dash between the driver and passenger seat. It's usually fairly easy to mount here - either by securing the mounting bracket to the floor or to the lower dash assembly - and is out of the way.

Other options include mounting on top of the dash or even mounted to the roof / headliner. But the obvious drilling marks these options require make them less popular.

Equipment Recommendation Summary

Now that you're an expert on pickup CB installations, it's time to find the perfect gear for your rig. Use the following links to get started putting together the perfect package for your truck:


Pat Haggerty

About the Author

As the owner and operator of Right Channel Radios, Pat Haggerty has been helping customers find the best radio solutions since 2008. He is highly knowledgeable in all mobile radio options and setups, including CB radios, GMRS radios, and HAM radios. His wide library of how-to and help articles is frequently referred to as one of the best resources for CB radio installations and technical support online. When he's not assisting radio enthusiasts online or on the phone, you can find Pat enjoying all that Montana's trails have to offer on his skis, mountain bike or Land Cruiser.

Recommended Products
Best Seller Uniden Pickup Truck CB Radio Kit

Uniden Pickup Truck CB Package

From $97.95

Frills-free and compact kit featuring the rugged Uniden 510 radio

2017+ Ford F250, F350, F450 & F550 CB Antenna Kit

2017+ Ford F250, F350, F450 & F550 CB Antenna Kit

From $88.95

Full antenna kit specifically for the F250, F350, F450 & F550 (2017+)

Best Seller Cobra 29 Complete Pickup Package

Cobra 29 Complete Pickup Package

From $208.95

Everything you need to install a clean, custom-looking CB in your pickup