Great PA speaker, solid and well built. I mounted mine under the hood on my F-150; to the air box. It's not loud enough to tell a left lane camper to move over at speed, but it's loud enough to have fun with otherwise.
Install and wiring were straight forward; strip, crimp, heat shrink.
CB PA Speaker - 25 Watt
Rat
Great little bracket
If you have an F-150 you're going to need to trim the plastic top cap on the bed rails to access the stake pockets. Once you've done that, install is very straight forward.
As you can see I modified mine just a bit so I could rotate the bracket 90° to tuck the antenna behind my cab so it didn't get raked off by brush and trees at the ranch.
I have a 4 foot firestick and it supports that weight fine, with a heavy spring, and no slapping the cab.
Truck Stake Hole CB Antenna Mount
Daniel Anderson
I installed the new President Bill III in my 2024 Tacoma. It was an easy install. I downsized from a Cobra 25WX NW due to space with a magnet antenna. I may have to install my Firestick antenna later. This antenna is working great so far. I purchased a radio mount for the handle in the Tacoma from Gigaparts, a prefect fit.
Right Channel Radios
Harold
Here are some photos of the Wilson Little Wil Replacement Whip installation on my Jimny:
Right Channel Radios
White Noise
Surely the big stud
I bought a typical stud @ 1/2” from another site and it hadn’t lasted a full road trip with a 102” whip, it stripped right out.
This super heavy duty stud, from right channel radio, @ 3/4” really gives some stability for the 102”.
