Firestik 3-Way CB Mount
- Our most popular CB antenna mount due to its versatility and durability
- Clamp can be positioned horizontally, vertically or converted into an "L" bracket
- Supports antennas up to 5' tall
The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! It is designed to attach to horizontal mirror arms or bars that measure .5" to 1" in diameter. The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall.
|Model / SKU:||Firestik SS64A|
|This mount is a great choice for trucks, SUVs and motorhomes. It easily attaches to a horizontal, vertical or flat surface. Can support antennas up to 5' tall. For mirror arms or bars measuring .5" - 1" in diameter. |
|Compatible with:||All fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base. Requires a PL-259 barrel-style coax connection.|
|Installation Notes:||The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. Omitting the clamp converts the mount into an "L" bracket that can be mounted to any flat vertical surface, such as the side of a motorhome or the back of a Jeep. The mount has a four-bolt pattern and comes with stainless steel mounting hardware and a PL-259 antenna stud.|
|Mount Location:||Flat Surface (Roof, Bumper), Mirror / Bar, Vertical Surface / Side Mount|
|Stud Type:||PL-259 (Barrel)|
|Product Includes:||Mount and barrel-style antenna stud|
Antenna and coax sold separately
The mount is 2” wide and will fit from a ½” to a 1” bar mount. This can be mounted to vertical or horizontal bars.
These are the stainless steel versions of our most popular mounts! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The clamp may be omitted to create an "L" bracket for mounting to flat vertical surfaces, such as the side of a motorhome or the back of a Jeep. All models include stainless steel mounting hardware. Use three-way mounting brackets for single or dual antenna installation on your car, truck, van, motorcycle or motorhome. If your mounting surface is strong, these mounts will easily support antennas up to 5' (1.5m) tall. The actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm) high. With the stud in place, the total height is 4.2" (107mm). They protrude outward from the vertical surface 1.9" (48mm). Using the standard bolts supplied with the bracket, you can install it on a tube with a diameter up to 0.850" (22mm). If longer bolts are used, the maximum tube diameter is 1.5" (38mm).
Putting the pieces together is simple. You can't go wrong with this mount.
Word good for several ways you want to mount . Worked in my steak bed opening well .
Well made product. Not shiny like pictured. It’s more of a matt finish
Tip quality gear shipped immediately. No room for improvement.
This is a very well engineered mount worked well,good price. Very satisfied.