Jeep JL, JT, & Gladiator CB Antenna Fender Mount (2018+)
- Designed specifically for Jeep JL, JT & Gladiator this mount uses existing holes in the hood frame to mount quickly and securely
- Made with 12 gauge steel to support heavier antennas
Designed specifically for the newest breed of Jeeps, this fender mount is made of 12 gauge stainless steel and attaches to the driver side hood rail on the JL and will support antennas up to 5' tall. We recommend pairing this mount with a 4' Firefly antenna, quick disconnect and 9' FireRing coax cable. If you put a 5' antenna on the mount, we strongly recommend using an additional self-tapping screw to further secure the mount to the fender. Don't have a 2018 or newer JL? Check out the JK CB antenna Fender mount.
Need a complete CB system for your Jeep JL? Check out the complete JL Jeep CB Radio Kit which includes this mount and a slick microphone clip.
|Model / SKU:||FMAB + K4R|
|2018 and newer Jeep JL, JT and Gladiators. Recommended for antennas up to 5' tall. When installing a 4' or 5' antenna, we recommend using a self-tapping screw along with the factory bolt. |
|Compatible with:||All CB antennas that use a standard 3/8" x 24 threaded base. Lug stud requires terminal or ring-style CB coax.|
|Installation Notes:||This mount uses existing holes in the hood frame to mount easily and securely. The antenna mounts on either the driver or passenger side of the hood rail.|
|Mount Location:||Hood / Fender|
|Stud Type:||FireRing Antenna Stud (Fits FireRing Coax Cables)|
|Product Includes:||Mount and FireRing stud|
Antenna and coax sold separately
Designed for 2018 and newer Jeep JL, JT and Gladiator. The mount is 12 gauge stainless steel, durable and rust-resistant. Mounts to the driver side hood fender and includes a FireRing stud compatible with FireRing coax cables. Made for antennas up to 5' tall.
This was a very easy install. Thanks
easy install, not a problem.
The mount for JeepJL went on very well and seems solid.
The mount attaches to the fender bold perfectly and very solid. Where it touches paint is under the hood and it is doubtful any will wear off in time. Included in the package was a Firestick stud, which also is very heavy duty. Since the stock jeep bolt is painted and insulated with a plastic washer, I made a custom ground wire that I screwed to one of the holes in the mount. The other end I attached to a nut / bolt on the body that is not painted. Highly recommended for your Jeep!