CB Antenna Quick Disconnect
- Our premium disconnect makes it easy to remove your antenna quickly—no tools required
If James Bond had a CB rig, we guarantee he’d have this CB Antenna Quick Disconnect. Rather than risk a run-in with Goldfinger, Bond would have the ability to push down, rotate and quickly remove his antenna, making it even easier to hide his souped-up 4x4 in a low-clearance cave for safe-keeping. Even if you don’t need a quick escape route, the Firestik Quick Disconnect comes in handy anytime you need to remove your antenna. Recommended for fiberglass antennas up to 4' tall and built with a stainless steel locking pin and spring for the ultimate in durability, even if a villain is on your tail.
THIS QUICK DISCONNECT HAS BEEN DISCONTINUED.
|Model / SKU:
|Internal Locking Quick Disconnect
|Antennas up to 4' tall. For antennas longer than 4' or for very heavy antennas such as the Wilson 2000, we recommend a super heavy-duty disconnect.
|Virtually all fiberglass and center-loaded CB antenna. The female top accepts all antennas with a 3/8" x 24 thread. The male bottom is a standard 3/8" x 24 thread and will screw into any CB antenna stud.
|Installation is easy; no tools required. Screw the disconnect into any CB stud or mount, then screw the antenna into the top of the disconnect. Disconnect can be used with an antenna spring. They are simply stacked/screwed on top of one another. The Disconnect K1A is about 2 7/8” tall.
|Quick disconnect accessory
CB Quick Disconnect Mount: There are many reasons you'd want to quickly remove your antenna without fumbling around for tools. Maybe your antenna is too tall to fit in your garage, parking garage, or you frequent the local car wash. Maybe you don't use your antenna every day, but you want to be able to snap it on in a hurry when you do. If that's the case, a quick disconnect is all you need. Featuring standard 3/8" x 24 threads, this quick disconnect will attach to a standard antenna stud and can be combined with a spring. This model has an internal locking mechanism which requires the user to press down and twist the upper mechanism to release the disconnect. This design requires more handling and machining than an external locking design, but offers weather-protected components and additional security from casual thieves who may not be familiar with the push-and-twist locking mechanism. The quick disconnect can be used with any of our antennas up to 4' (1.5m) tall and with all accessories. The actual installed size is 2.9" (74mm) high by 0.600" (15mm) diameter. The upper and lower body parts are made of stainless steel. The locking pin and spring are made of stainless steel.
This disconnect used with the Firestick spring mount is a great set up, different antennas can be quickly changed!
Have not had a chance to install
The QD makes it convenient to remove your antenna and keep the connector clean and dry. A quick tip is to put a small coating of dielectric grease on the top outside of the QD to make it easier to slide the antenna on. It will even actually improve your signal. It reduced my SWR by a 0.2. Right Channel’s customer service cannot be beaten, shipping is quick and prices are fair. Buy here with confidence that you will be getting your smartest deal.