ProComm PT99 CB Base Antenna
- One of our top performing omni-directional base station antennas
- Made from rugged fiberglass for longtime durability
- Antenna can be broken down into four separate parts for portability
Experience high performance from an omni-directional base station antenna with the ProComm PT99. At 18.5' tall and made with rugged fiberglass, the ProComm PT99 CB Base Antenna guarantees high performance with the added feature of being able to break down into four separate parts. If you're frequently on the go and need a base antenna that can be packed up and transported easily, the PT99 is a great choice.
|Model / SKU:||ProComm PT99|
|Recommended for:||CB base station users needing an omni-directional antenna that can be easily set up and disassembled.|
|Notable Features:||18.5' Tall, Breaks Down Into 4 Sections, Includes Mounting Hardware|
|All CB radios. The 18.5' base antenna includes "U" bolt mounting hardware to attach to a post or the side of a building.|
|Range(s) provided are for comparison purposes only and are subject to numerous installation and environmental variables. For more detailed information, please see our reference article on CB Antenna Range Approximation.|
|Product Includes:||ProComm PT99 Base Station Antenna|
Mounting "U" bolts
Coax cable sold separately
- 10-12 meter
- 2,000-watt power rating
- Rugged fiberglass construction
- Fast and simple SWR tuning
Very good delivery.
Work on "NO SHIPPING CHARGES" then I WAS CHARGED FOR SHIPPING.
I have had this antenna for about 3 weeks now. So far, not a single problem with this product! My setup goes like this, since I have no roof access I bought a MFJ fiberglass telescoping antenna stand for the backyard and mounted the PT99 no that, found a semi clear spot in the backyard That was the only hard part. Pushed the antenna up where the bottom feed coax was no less than 8 ft off the ground. Also running RG58 at 75 ft with two 1 foot sections of RG213U starting at the feed point.
Trick; where the RG58 starts I added a 6 ferrite beads and created a loop with one ferrite bead at the radio. This killed any common mode current problems from a long coax run.
SWR Ch-1 1.0 Ch 40 1.2 Ch 20 1.10
AM I'm getting out 10 to 15 miles
SSB I'm getting out skipping all most a thousand miles! On 10 to 12 volts, hard to do in California.
Bottom line is I would buy another PT99 if lighting hits this one!!!
Echo Bravo Whiskey 426.
After sending a request on wind speed rating from ProComm, Their reply was that depending on how rigid or flexible your mast is has a lot to do it's ability. They also said it is made to flex quite a bit so it does not break under pressure. And so that is why it is not listed in product info. They said if it does break out of warranty they will do their best to help. Thanks again Right Channel for your great service
Purchased this antenna from Right Channel Radios and LOVE it ! ! Put it together and had up in less than an hour... Just checked the SWR's and it came in perfect at 1.3 on 20....1.0 on 1.... and 1.5 on 40... It just really doesn't get any better than that out of the box running 75' of coax from my radio to the antenna... Can't beat the price or the service from Right Channel Radios.... I even got free shipping and had it in my hands in 3 days after ordering it... I highly recommend Right Channel Radios..
Bought this a few weeks ago. Found it to be smaller in diameter than expected. Assembly was easy and threads fit well. Used dielectric grease on threads and used silicone sealant after assembled. Applied some flat camo brown paint to protect fiberglass from sun, and to blend in with trees. SWR's flat on 40 and 1;2 on1 0n 11 meters (CB). Waiting for winds with fingers crossed. Will update in future. P.S. Product info should have a wind speed rating. Thanks Right channel for being prompt with your service!!!