Noise Filter for CB Radio Power Cords
- Use this noise filter to reduce electrical noise coming through your CB
- Installs easily with a 3-pin power cord
- Compatible with most medium to large CB radios
This 20-amp noise filter reduces the electrical noise that makes listening to incoming CB transmissions difficult. The filter easily installs using a 3-pin power cord, which plugs directly into the back of most medium to large CB radios. If your radio does not accept a 3-pin plug, you can easily cut the attachment off and match the positive and negative wires.
|Model / SKU:||CBNF3AXX|
|All CB radios. If your CB has a 3-pin plug in back, the noise filer will plug in easily. If not, you can cut the attachment off and simply match the positive and negative wires.|
Helped a little, but not worth the effort
Easy to install, wired radio directly to the battery and has reduced the engine noise a great deal ( not completely ) much better than without.
Good fast service from RCB however the project was put on hold here for a few weeks due to other priorities. It is now installed and working. The only feedback I have is that the screws that came with it were too short as they barely protruded from the body of the device. Not really a problem as I have plenty of screws.
Have not opened the box. Looks like I don't need it after all.
While this did reduce the noise, it did not eliminate it. Overall does what it's intended to do.