Hummer CB Antenna Mount
- Designed with Hummer drivers in mind, this mount attaches to the inside groove of the factory roof rails
- Attach with a terminal or ring-style coax cable
Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation.
|Model / SKU:||Firestik SSJ4|
|Recommended for:||Mounting fiberglass or center-load CB antennas on Hummers with factory roof rails.|
|All CB radios, and all fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base. Compatible with Hummers that have factory roof rails.|
This mount fits nicely in the groove of the Hummer's factory roof rails. To fit the mount inside the roof rail, turn the mount upside down and slide the loose rectangular end between the rails. The bolt heads will be facing down, and the nuts will be facing up. Attach the antenna stud and coax cable (we recommend a ring or terminal end coax cable) to the mount. Once the antenna stud and cable are attached, you can tighten the mount to the roof rack. Detailed mounting description here.
Note: In order for the mount to ground to the frame of the vehicle, you may have to scrape off some paint on the inside of the roof rail.
|Hummer Roof Rail|
|Lug (Ring and Terminal)|
Hummer mount, lug-style antenna stud and mounting hardware.
Coax cable sold separately