Firestik 3-Way CB Mount (Lug)
- Our most popular CB antenna mount due to its versatility and durability
- Clamp can be positioned horizontally, vertically or converted into an "L" bracket
- Supports antennas up to 5' tall
Firestik knows we like options, so they created a three-way antenna mount for added install options. Choose between horizontal or vertical mounts, either on mirror arms or rails. If that doesn’t do it for you, the back clamp can be removed, turned the mount into an L-shaped bracket that can screw onto virtually any vertical surface. Lug style requires a FireRing for installation. Depending on the strength of your mounting surface, this mount can accommodate an antenna of up to 5’, designed to last from rust-resistant stainless steel.
|Model / SKU:
|The three-way mount is a great choice for trucks, SUVs and motorhomes. It easily attaches to a horizontal, vertical or flat surface. Can support antennas up to 5' tall.
|All fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base. Lug-style stud requires a ring or terminal-end coax cable.
|The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. Omitting the clamp converts the mount into an "L" bracket that can be mounted to any flat vertical surface, such as the side of a motorhome or the back of a Jeep. The mount has a four-bolt pattern and comes with stainless steel mounting hardware and a lug-style antenna stud.
|Flat Surface (Roof, Bumper), Mirror / Bar, Vertical Surface / Side Mount
|Lug (Ring and Terminal)
|Mount and lug-style stud
Antenna and coax sold separately
These are the stainless steel versions of our most popular mounts! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The clamp may be omitted to create an "L" bracket for mounting to flat vertical surfaces, such as the side of a motorhome or the back of a Jeep. All models come with stainless steel mounting hardware. Use three-way mounting brackets for single or dual antenna installation on your car, truck, van, motorcycle or motorhome. If your mounting surface is strong, these mounts will easily support antennas up to 5' (1.5m) tall. The actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm) high. With the stud in place, the total height is 4.2" (107mm). They protrude outward from the vertical surface 1.9" (48mm). Using the standard bolts supplied with the bracket, you can install it on a tube with a diameter up to 0.850" (22mm). If longer bolts are used, the maximum tube diameter is 1.5" (38mm).
Pick up lower sideband on the bearcat 980 very well!