Firestik Side Mount CB Antenna Kit

$29.95

Availability:

In Stock

Qty:

Quick Overview

This side mount kit is perfect for achieving a clean, professional CB antenna installation. The molded "teardrop" mount from Firestik installs to any flat surface, concealing all wiring on the inside of the vehicle's chassis. This kit also includes 18' of Firestik quality, 95% shielded coax cable with terminal ends. You'll be hard-pressed to find a cleaner-looking installation solution than this side mount from Firestik!

Firestik Side Mount CB Antenna Kit MK-M2

Double click on above image to view full picture

More Views

Additional Information

Model / SKU:	Firestik MK-M2
Recommended for:	Mounting on vertical surfaces. This kits hides the mounting bracket to achieve a seamless factory look. Recommended for standard fiberglass antennas up to 3' or lightweight fiberglass antennas (like the Firestik Firefly) up to 4'.
Compatible with:	All CB radios, and all fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base.
Installation Notes:	The molded side mount has two mounting bolts. You'll need to drill two holes (5mm and 10mm) and attach the bolts from inside the vehicle. The mount can be mounted to surfaces up to 3/10" thick. The included terminal-style coax attaches to the mount from inside the vehicle, creating a clean, wire-free external appearance.
Mount Location:	Flat Surface (Roof, Bumper)
Stud Type:	Lug (Ring and Terminal)
Material	Other
Product Includes:	Firestik M-2 side mount 18' of CB coax cable

Details

Firestik CB Antenna Mounting Kit: If you're looking for a side mount with style, this is the kit up for you. The Firestik mount makes for a smooth, professional CB antenna installation along any vertical surface. When installed, the coax connectors are concealed on the inside of the vehicle (requires one 13/32" (10mm) and one 13/64" (5mm) mounting hole). We recommend using the mount with Firestik or Firestik II antennas up to 3' (92cm), or FireFly and RoadPal antennas up to 4' (1.2m). The actual mounting surface is approximately 3.125" (79mm) x 1.675" (43mm). Outward protrusion is about 1.875" (48mm). This kit includes a Firestik molded side mount and 18' (5.5m) of professional-grade FireFlex coaxial cable. Mount includes rubber gasket and steel backer plate.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

Very Clean Install on Jeep JK Unlimited
Review by BlackRockBurner

Overall Rating

I placed the mount on the rear tub between the driver's side tail light and rear door jam with minor interior sheet metal trimming. I am very pleased with the install and how the coax is protected from water, dirt and mud. (Posted on April 26, 2013)

Do you find this review helpful? Yes No

Has to be vertical surface only.
Review by Foxboss9

Overall Rating

I mounted this on the truck cab and had to cut down the mount because of the angle of the cab. I knew I had to modify this when I had ordered and it worked out okay. (Thank God I have a plastic welder) The reason for the four stars is that the mounting plate needs to be bigger to help support larger flat panels as mine is a little "flimsy". Other than that, it is a nice addition to my truck. (Posted on March 14, 2013)

Do you find this review helpful? Yes No

(0 of 1 people found this review helpful)

Nice clean install!
Review by Mr. Coffee

Overall Rating

It looks nice! And it is a good quality piece. Thanks! (Posted on December 13, 2012)

Do you find this review helpful? Yes No

Cleanest install
Review by Jason

Overall Rating

This mount is as clean as they get. The ring-lug connection makes it very easy to trim your coax without having to deal with UHF connectors. Just use good crimpers and automotive lugs. I would recommend getting another pair of nuts with lock washers for it so that you can attach it to the body with one nut. Then, attach the coax with a second nut. This will let you get it really snug without having the coax connectors in the way.

This mount increases the effective length of the antenna because of the distance between the antenna threads and the effective ground plane. No problem for CB but I also use it for UHF. And the antenna needed to be trimmed significantly. Not a problem, but don't be surprised if you have to trim an extra inch for very short antennas.
(Posted on October 2, 2012)

Do you find this review helpful? Yes No