Door Jamb CB Antenna Mount

$20.95

Availability:

In Stock

Qty:

Quick Overview

This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall.

Door Jamb CB Antenna Mount

Double click on above image to view full picture

More Views

Additional Information

Model / SKU:	Firestik SS204A
Recommended for:	Mounting to an inner door jamb. The vertical adjustment feature lets you mount the jamb on either side of the vehicle or to vehicles with non-vertical door jambs. Recommended for antennas up to 4' tall.
Compatible with:	All fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base.
Installation Notes:	This mount attaches to the inner edge of the door jamb and contains four holes to secure it to the vehicle using screws or bolts. We recommend first marking where the holes will be drilled using the mount as a template. You can then drill the holes and attach the mount.
Mount Location:	Vertical Surface / Side Mount, Other
Stud Type:	PL-259 (Barrel)
Material	Stainless Steel
Product Includes:	Door jamb mount PL-259-compatible antenna stud Antenna and coax sold separately

Details

These Firestik mounts were specifically designed to enable antenna installation on vehicles where other mounts might not work. The primary goal was to offer a mount that could attach to the inner door jamb, such as the jamb found on the rear or side door of a cargo van. The mounting screws are on the inner edge of the jamb, eliminating visible holes in the vehicle. Like many other Firestik mounts, the versatility of these mounts go well beyond their targeted use. For antennas up to 4' tall.

Bracket parts and mounting hardware are made of stainless steel for years of trouble-free use. The bracket is 1.5" (38mm) wide and has a 2" (50mm) reach for mounting inside the door jamb. Overall, the mount is 4.2" (105mm) long. In order to compensate for the door jamb angles, the stud bracket will swivel a full 180 degrees, 90 in each direction. This feature lets you mount the antenna on the left or right side of the vehicle.

Recommended for antennas up to 4'
Screw-on coax attachment
Stainless steel construction
Standard 3/8" x 24 antenna base
Two-year warranty

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

100%
Review by KJ4EX

Overall Rating

I bought two, need two more. One on the rear door jamb of my GMC Envoy XUV, and the other inside the vertical part of my VW Jetta trunk lid. Both are used for Ham Radio Antennas, including a 102 inch whip, Hamsticks, and a Webster Bandspanner with a rope support. Many local Hams have asked where to get them. They know now! (Posted on February 28, 2013)

Do you find this review helpful? Yes No

(1 of 1 people found this review helpful)

Makes antenna positioning easier
Review by JBK

Overall Rating

This door jamb mount made positioning my 4-foot Firestik II antenna on the rear door jamb of my 2000 Cherokee Sport an easy and clean installation with a resulting clean look and serviceable position for the antenna. (Posted on July 18, 2012)

Do you find this review helpful? Yes No

(2 of 2 people found this review helpful)

Very versatile & easy to install!
Review by Gary P

Overall Rating

I used this mount to mount my antenna in the rear hatch of my 4Runner. Super easy to install and works great. I love the adjustability of this mount allowing me to install it on either side of the vehicle.
(Written 5/13/2010) (Posted on December 6, 2011)

Do you find this review helpful? Yes No