Firestik CB Coax Cable - 18'

$19.95

Availability:

In Stock

Quick Overview

Firestik CB coax is an excellent quality choice for general CB installations. The RG-58 coax cable has a 95%+ shielding rating, which reduces signal loss and improves your effective transmission range. A stranded center conductor and polyvinyl insulation help the cable hold up against internal shorts and external wear. This Firestik K8A coax is 18' long and has a PL-259 connection.

Firestik K8A CB Coax Cable

Double click on above image to view full picture

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Firestik K8A CB Coax Cable
  • Firestik K8A CB Coax Cable PL-259

Additional Information

Model / SKU: Firestik K8A
Coax Type: RG-58 (Single)
Connection Type: PL-259
Product Details: 18' long
95% shielding
Stranded center conductor
Durable polyvinyl center
Compatible with: All CB radios and mount studs that accept a PL-259 coax connection.

Details

Quality coax cable is to your radio what clean arteries are to your heart. Firestik single-lead cable assemblies are made from RG-58A/U Fire-Flex coaxial cable. They can be used on any single antenna installation, including CB, scanner, 2-meter and 10-meter.

This Firestik cable is 18' (5.5m) long, and both ends terminate with a PL-259 type connector. Designed for use with Firestik K-4A or R-4A antenna studs and any mount that uses either of these SO-239 stud mounts.

  • Stranded center conductor to maximize flexibility and prevent untimely breakage
  • Shielding coverage that averages 95% to protect against RF leaks and interference
  • Polyvinyl center insulation for ruggedness and longevity
  • Performance that exceeds mil-spec requirements for 50 ohm RG-58A/U coax
  • One-year manufacturer's warranty

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

Easy!

Review by zigZag
Overall Rating
I have a late model Camaro with a custom antenna mount placing the antenna where the stock am/fm went. This coax is small enough and flexible enough that I was able to work it in and under all the factory plastic and carpet without drilling or cutting anything. I also notice a huge difference in performance between this and the original 10' coax I got from Radioshack. Much better clarity. Used with a Firestik Quick Disconnect, Firestik Medium CB antenna spring and a Firestik FS antenna. (Posted on January 18, 2013)
Do you find this review helpful?  Yes No
(1 of 1 people found this review helpful)

Firestik 18' Coax Cable

Review by Dave D
Overall Rating
I ordered this cable to go with the 3' Firestik antenna, and was surprised how small and supple Coax cable has become. I ran it from the passenger door mirror of my Bronco II, across the engine side of the firewall, through a grommett, under the carpet to the 75 WX ST unit under the driver seat, and still had cable left. The length is tuned for best reception, so there was no need to cut the excess. And the pre-installed ends made installation a snap!
(Posted on September 6, 2012)
Do you find this review helpful?  Yes No
(1 of 1 people found this review helpful)

Nice, small cable!

Review by Anthony L
Overall Rating
Very nice cable, small in diameter so it's flexible and easy to run. It's connecting a Wilson 4' antenna to a Cobra 75 and works perfectly. Great SWR readings and awesome signal quality. (Written 6/21/10)
(Posted on December 30, 2011)
Do you find this review helpful?  Yes No
(1 of 1 people found this review helpful)

Works and didn't have to drill

Review by Darrel
Overall Rating
I used this cable to connect a 3' Firestik antenna mounted on the hood of my '98 Ford Explorer to the junction box of a Cobra 75 WX ST radio mounted behind the dash. I was able to pass the cable end through the grommet where the AM/FM antenna enters the cab and therefore didn't need to drill any holes in the firewall. (Written 4/21/2009) (Posted on December 30, 2011)
Do you find this review helpful?  Yes No
(2 of 2 people found this review helpful)