Firestik FireRing CB Coax for Dual Antennas - 18'
- Choose this coax if you need a low-profile, weather-resistant setup to install with dual antennas
*Important Note: This cable has been discontinued. If you need a coax cable with horizontal connection we recommend the Dual Firestik terminal cable.
Achieve a low-profile, weather-resistant coax setup that's easy to install with this Firestik FireRing kit for dual antennas! The ring-style connections are perfectly suited for low-profile and tight installations, as they extend horizontally -- not vertically -- from the mounting surface. They're also significantly more weather-resistant than standard threaded PL-259 connections, which are built primarily from rust-prone metal. The FME (For Mobile Equipment) ends allows the PL-259s to unscrew, making installation, drilling and cable routing MUCH simpler, as the cable head diameter is reduced from 3/4" to 3/8". Built from RG-59 coax, the cable is 95% shielded for improved signal performance and uses a stranded center for increased durability. The coax is 18' long and is compatible with the FireRing antenna stud.
|Model / SKU:||Firestik MU-9R18|
|Coax Type:||RG-59 (Dual Antennas)|
|Product Details:||18' long|
Two low-profile, weather-resistant ring connections
Ring can be mounted above or below mounting surface
FME connectors for easier routing and installation
Stranded center conductor
Polyvinal center for durability
*Does not include two extra-long stud bolts
|The ring terminals are compatible with lug-style studs.|
This cable kit for dual antennas uses Firestik's popular and respected FireRing cable connectors, high-quality cable and mini-UHF connectors for easy cable routing through tight places.
To make the co-phase harnesses as user-friendly as possible, Firestik needed to make them easy to route. Since it would require a 1" hole to pass the FireRing through, the manufacturer had to come up with a better idea, which led to mini-UHF connectors. Most co-phase harnesses are routed from the radio to the mounts. If you want the convenience of PL-259 connectors, you either had to drill 3/4" holes or have the knowledge and tools to install PL-259 connectors once the cable was routed. This package from Firestik changes all that.
With this assembly, you run each leg of the co-phase harness from each mount to the radio. Because the radio end of these cables terminate with female mini-UHF connectors, they will pass through a 7/16" (11mm) hole. After both leads are at the radio, you simply attach the "Y" connector to the ends and attach it to the radio. No coax to process, no soldering joints to complete and no tools needed. And best of all, you get all of the benefits of the exclusive FireRing connectors.
- Convenient FME connections allow for easy routing without having to drill large holes
- FireRing connections are convenient, secure, low profile and durable
- Stranded center conductor to maximize flexibility and prevent untimely breakage
- Shielding coverage that averages 95% to protect against RF leaks and interference
- Polyvinyl center insulation for ruggedness and longevity
- Performance that exceeds mil-spec requirements for 75 ohm RG-59A/U coax