Wilson Flex CB Antenna
[Wilson FLEX]

Works great! really useful at my University where we have to park in parking garages

This thing is awesome! It was very easy to tune. I have already put it to the test in trees and a parking garage with a low ceiling. It is VERY flexy!

The Wilson 4" flex antenna originally calibrated to 1:1.4. After a little tweaking it came down to 1:1.2 on the SWR. This antenna was mounted to my Jeep JK and used on the trail being abused by tree limbs. It performed great and its ability to bend 180 degrees was true to its advertising. The extra ground mount that protrudes at the base of the fiberglass is really unneeded and its instructions should mention that.

As an off-road enthusiast, I was in need of a CB radio to communicate with friends while on the trail. I own a 2006 Jeep Rubicon Unlimited and wanted a compact unit. After reading several reviews on rightchannelradios.com, I selected a Uniden Pro520XL with a Wilson 3' Flex antenna, a Fire-Flex coax cable, and a 10 watt PA speaker.

I mounted the antenna above the left rear tail light using a stainless steel mounting bracket installed behind the tail light assembly and connected the Fire-Flex coax cable (I did have to make a trip to the local electronics store purchase the double female connector needed to connect the antenna to the bolt that came with the Fire-Flex coax cable but, the part was only a few dollars). This made for a very clean set-up and it positioned the top of the 3' antenna about 6 inches above the soft-top on my Jeep.

Communication from rightchannelradios.com was excellent; e-mail responses to the few questions I had were immediate. Furthermore, the reviews and tech tips available on rightchannelradios.com were very helpful. I sincerely hope someone finds this review equally helpful.

I highly recommend rightchannelradios.com and will return again for any CB needs I have in the future.