CB Installation Checklist

The following is a checklist of all the components needed for a fully functioning mobile CB installation:

Required Components

• CB Radio - Most new CB radios come with a microphone, mounting bracket and power cord, so you won’t need to buy those separately.

• CB Antenna - Without an antenna, your radio is useless! Don’t forget this key component.

• CB Antenna Mount - You’ll need a mount of some sort to attach the antenna to your vehicle. If you’ll be using a magnet, roof or trunk-lip antenna, you won’t need to worry about this as the antenna base doubles as the antenna mount.

• Coax Cable - The cable that connects your radio and your antenna. If you’re using a magnet, roof or trunk-lip antenna, the coax is likely included with the antenna mount.
  

• SWR Meter - An SWR meter is essential and is used to properly adjust your antenna to your vehicle through a process called “Antenna Tuning”. Failing to tune your antenna can result in poor system performance and even permanent radio damage. We offer a number of extremely affordable SWR meters so you can order one alongside your other radio components. For more on antenna tuning and SWR meters, please refer to CB Antenna Tuning and SWR Explained.

Optional Components

• CB Antenna Spring - Springs are installed between the mounting surface and the antenna and allow the antenna to bend at the base. They prevent damage to antenna, vehicle and mount in the event you catch the antenna on an obstruction while moving.

• Antenna Quick Disconnects - Disconnects are installed between the mounting surface and the antenna and allow you to remove the antenna quickly without tools.
  

• PA Horn - A number of CB models feature a public address mode that requires an external PA horn for use. A PA Horn is just a glorified (usually weatherproof) speaker that is connected via a wire to the CB and mounted outside the vehicle.