Jeep Wrangler CB Antenna Hood Mount

$15.95

Availability:

In Stock

Qty:

Quick Overview

Designed specifically for Jeep Wranglers, this CB antenna hood fits 1997 and newer models. The stainless steel mount attaches to the front fender lip under the vehicle's hood and can be mounted on either side. After installation, no mounting holes or hardware are visible as all mounting hardware is hidden. This mount can also be used for a clean, professional roof rack install on Hummers, as seen here.

Jeep Wrangler Hood Mount

Double click on above image to view full picture

More Views

Additional Information

Model / SKU:	Firestik SSJ4A
Recommended for:	Mounting a CB antenna on the hood of 1997 and newer Jeep Wranglers. This product also mounts well on Hummer roof racks. Recommended for antennas up to 4' tall.
Compatible with:	All fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base.
Installation Notes:	When mounting the bracket, you'll need to drill two 1/4" holes in the inner fender lip. A 12-gauge, 2" x 3/4" support plate installs on the bottom edge of the fender to strengthen the mount. We supply you with 1/4-20" stainless steel bolts, nuts and washers to secure the bracket to the vehicle. We recommend mounting the bracket at least 8" (20cm) from the rear edge of the fender, where the mount will have more support. All installation hardware will be hidden under the hood.
Mount Location:	Hood / Fender
Stud Type:	PL-259 (Barrel)
Material	Stainless Steel
Product Includes:	Jeep Wrangler hood mount, PL-259 style antenna stud Antenna and coax sold separately

Details

Firestik CB Antenna Mount: These mounts were designed for Jeep Wrangler models 1997 and newer. This mount lets you install your antenna on either side of the vehicle. The mount and support bracket are made from 12-gauge (0.109") stainless steel. Once installed, you won't see any mounting holes. All mounting hardware -- also stainless steel -- is hidden under the vehicle's hood. Although these mounts are made for newer Wrangler models, the mounting concept is very basic, and the mounts will likely work on pre-1997 Jeeps as well. Mount includes a standard 3/8" x 24 threaded antenna mounting stud.

If you plan on using your vehicle on severe terrain, you should move the mount forward (i.e., closer to the fender bolt) for added stability. The Jeep fender design leaves a large portion of the fender unsupported near the windshield.

The upper bracket is 2" (51mm) wide and 3" (76mm) long. A slight angle on the inside edge of the bracket follows the angle of the hood line. To mount the bracket, you'll need to drill two 1/4" holes in the inner fender lip. A 12-gauge, 2" x 3/4" support plate installs on the bottom edge of the fender to strengthen the mount. We supply you with 1/4-20" stainless steel bolts, nuts and washers to secure the bracket to the vehicle.

Note: The rear part of the fender on newer Jeeps does not have the support found in earlier models. On these vehicles, we recommend mounting the bracket at least 8" (20cm) in front of the rear edge of the fender, where it has sufficient support. If you mount it too far back, or if the rear part of the fender is not given additional support, the fender will flex from any whipping action of the antenna, depending on antenna size.

Recommended for antennas up to 4'
Screw-on coax attachment
Stainless steel construction
Standard 3/8" x 24 antenna base
Two-year warranty
View detailed installation pictures courtesy of Stu Olson.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

Simple to install and works great!
Review by Daniel Lindholm

Overall Rating

This is the number one antenna mount for your Wrangler. It is simple to install, guarantees a strong electrical ground and provides for constant visualization of your antenna system. Just remember to measure twice and drill once. I'd purchase another with no hesitation whatsoever.
(Written 3/02/2009) (Posted on December 1, 2011)

Do you find this review helpful? Yes No