|Model / SKU:||Firestik MK-DM18R or (DM4 + K4-8R18)|
|Recommended for:||Pickups and commercial/industrial vehicles. Ideal for applications requiring a permanent, secure mount that can accomodate larger CB antennas up to 5' tall.|
|Compatible with:||All fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base.|
Note: The PL-259 connector (radio screw-on end) is supplied in this kit, but is NOT installed on the coax cable. This allows the cable to be routed into the vehicle through a smaller (0.375") hole. After the connector is placed on the coax, the center must be soldered to the PL connector.
|Mount Location:||Flat Surface (Roof, Bumper)|
|Stud Type:||Lug (Ring and Terminal)|
|Product Includes:||Firestik DM4 dome mount
18' of FireRing coax cable
The dome mount is made to fit a standard 1/2" (13mm) hole, so you can use it on all common mounts (mirror mounts, flat mounts, stake hole mounts, etc.) or by itself as a stand-alone mount. Each model includes a rubber seal and an underside support washer. These mounts have a 2" (51mm) diameter base and, when installed with the rubber seal in place, stand a little over 2" (52mm) tall.
Nice on My Crown Victoria - Great Service, Too!Review by Tom Jose
(Posted on January 2, 2012)