Firestik 3-Way Dual CB Antenna Kit

$69.95

Availability:

In Stock

Qty:

Quick Overview

This Firestik kit is perfect for mounting and wiring dual CB antennas! It features the handy three-way mount, our most popular CB antenna mount due to its versatility and durability. This stainless steel mount can be installed on vertical and horizontal bars, and on flat vertical surfaces as an "L" bracket. If you have a strong mounting surface, these mounts will easily support antennas up to 5' tall. Kit includes 18' of quality, 95% shielded RG59 coax cable for connecting the mounts and antennas to your radio.

Firestik MK-64A9A CB Antenna Mount

Double click on above image to view full picture

More Views

Additional Information

Model / SKU:	Firestik MK-64A9A or (2*SS64A + RP-18CCP)
Recommended for:	Trucks, SUVs and motorhomes. The mount easily attaches to horizontal and vertical bars or a flat vertical surface. Supports antennas up to 5' tall.
Compatible with:	All CB radios, and all fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base.
Installation Notes:	The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. Omitting the clamp converts the mount into an "L" bracket that can be mounted to any flat vertical surface, such as the side of a motorhome or the back of a Jeep. The mount has a four-bolt pattern and comes with stainless steel mounting hardware and a PL-259 antenna stud.
Mount Location:	Flat Surface (Roof, Bumper), Mirror / Bar, Vertical Surface / Side Mount
Stud Type:	PL-259 (Barrel)
Material	Stainless Steel
Product Includes:	(2) Firestik SS64A 3-way mounts 18' of quality, 95% shielded RG59 coax

Details

The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. Omitting the clamp converts the mount into an "L" bracket that can be mounted to any flat vertical surface, such as the side of a motorhome or the back of a Jeep. All models include stainless steel mounting hardware. Use three-way mounting brackets for dual antenna installation on your car, truck, van, motorcycle or motorhome. If your mounting surface is strong, these mounts will easily support antennas up to 5' (1.5m) tall. The actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm) high. With the stud in place, the total height is 4.2" (107mm). They protrude outward from the vertical surface 1.9" (48mm). Using the standard bolts supplied with the bracket, you can install it on a tube with a diameter up to 0.850" (22mm). If longer bolts are used, the maximum tube diameter is 1.5" (38mm).