Jeep & Off-Road CB Radio Equipment

What You Should Know:

Equipment: We recommend fiberglass antennas almost exclusively, as they hold up to the rigors of off-road driving and can be mounted just about anywhere. Radios must be both durable AND compact. The Uniden 510 Show More...
and Cobra 75 radios fit the bill nicely and are our two best-selling off-road CB models. We also recommend stainless steel mounting hardware and RG8X coax, which is beefier and better shielded than standard grade coax. To protect your antenna and off-road vehicle, we suggest a spring for the inevitable impact that will occur.  

Mounting Considerations: If available, a vehicle-specific mount is typically the best option in terms of integration and convenience. We stock custom mounts for Jeep Wranglers, FJ Cruiser, Hummers and Toyota T100s. We also have a large number of Ford, Chevy/GMC and Dodge hood mounts in our CB Pick-up Truck category. General hood channel and rear bumper/tire carrier installations are also popular. If mounting on a swinging tire carrier, make sure that it's properly grounded to the chassis, as many are insulated. As always, the longer your antenna -- and the higher up you mount it -- the better your range will be.

(Hide Information)

13 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Uniden Jeep Kit

    Uniden 510 Jeep & Off-Road Kit

    33 Review(s) | Add Your Review

    From: $119.95

    To: $156.90

    If you're hunting for an off-road CB radio package, but you'd prefer not to spend a fortune on a new install, this kit is for you! We worked closely with off-road owners to create an affordable yet durable package to simplify shopping and installation. This kit is built around the Uniden 510 radio, known for its no-frills, compact design. And its legendary reputation for reliability makes it a top pick with our off-road and industrial customers. We also include a durable Firestik or Wilson antenna, choice of mounting hardware, high-grade coax and SWR meter -- everything you need for a complete install! Get a proven, trail-ready install without the hours of shopping and research with the Uniden Jeep & Off-Road Kit. Learn More
  2. Grabber Mount for CB Antennas

    Grabber Mount for CB Antennas

    $29.95

    Workman's grabber mount is truly the Swiss army knife of CB antenna mounts! You can attach this mount to virtually anything with an exposed edge that the grabber's teeth can clamp onto. To tighten the mount, simply turn the triangle-shaped screw, and the teeth come together. The mount has a pre-drilled 1/2" hole to accommodate standard antenna studs. The stud surface rotates 90 degrees for use on vertical and horizontal clamping surfaces. Made from rust-resistant stainless steel, this mount is built to endure years of weather and abuse. Learn More
  3. Hummer CB Antenna Mount

    Hummer CB Antenna Mount

    $14.95

    Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More
  4. Firestik MK-64A8A CB Antenna Kit

    Firestik 3-Way CB Mounting Kit

    $32.95

    This Firestik kit features the three-way mount, our most popular CB antenna mount due to its versatility and durability! The stainless steel mount can be mounted on vertical and horizontal bars, and to vertical surfaces as an "L" bracket. If you have a strong mounting surface, these mounts will easily support antennas up to 5' tall. Kit includes 18' of quality, 95% shielded RG8X CB coax cable. Learn More
  5. Firestik 3-Way CB Mirror Mount

    Firestik 3-Way CB Mount

    1 Review(s) | Add Your Review

    $15.95

    The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall. Learn More
  6. Firestik CB Antenna Spring SS-3M

    Medium CB Antenna Spring

    6 Review(s) | Add Your Review

    $9.99

    Protect your antenna, mount and vehicle from blows to the antenna with this durable antenna spring. Built from stainless steel, this medium spring is rust- and weather-resistant. Designed for antennas up to 3' tall. For larger antennas, we recommend a heavy-duty spring. Learn More
  7. Firestik CB Antenna Spring SS-3H

    Heavy-Duty CB Antenna Spring

    20 Review(s) | Add Your Review

    $12.95

    Designed for CB antennas up to 5' tall, this heavy-duty spring will protect your antenna from snapping or bending. Built from stainless steel, this durable spring is rust- and weather-resistant. For antennas longer than 5', or for heavy center-load antennas, we recommend a super heavy-duty spring. Learn More
  8. Door Jamb CB Antenna Mount (Lug)

    Door Jamb CB Antenna Mount (Lug)

    3 Review(s) | Add Your Review

    $17.95

    This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. The lug stud requires a terminal or ring-style CB coax. Learn More
  9. Door Jamb CB Antenna Mount

    Door Jamb CB Antenna Mount

    3 Review(s) | Add Your Review

    $20.95

    This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More
  10. Firestik K-1A CB Quick Disconnect

    Firestik CB Antenna Quick Disconnect

    29 Review(s) | Add Your Review

    $16.95

    This premium disconnect is our best-selling CB disconnect and the one we recommend for general CB use! This Firestik CB disconnect makes removing your antenna fast and easy, which comes in handy in low-clearance areas. Simply push down and rotate, and your antenna pops off -- no tools required! Built with a stainless steel locking pin and spring, this accessory is designed to last. Recommended for fiberglass antennas up to 5' tall. Learn More
  11. Clamp-On Firestik CB Antenna Mount

    Clamp-On Firestik CB Antenna Mount

    1 Review(s) | Add Your Review

    $14.95

    These stainless steel mounts were specifically designed for the side mirror arms commonly found on pickup trucks. When used in this manner, there's no need to drill holes in the vehicle or mirror arm. This mount can also be bolted to any flat surface by removing the clamp. Stainless steel PL-259-compatible antenna stud included. Learn More
  12. Door Jamb CB Antenna Mount Kit

    Door Jamb CB Antenna Mount Kit

    2 Review(s) | Add Your Review

    $29.95

    This kit features a unique CB mount designed for installation on a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Kit includes 18' of quality RG8X CB coax cable. Learn More
  13. Firestik Stake Hole CB Mount Kit MK-294R

    Truck Stake Hole CB Antenna Kit

    2 Review(s) | Add Your Review

    $29.95

    With this Firestik kit, truck owners can mount their antennas using the stake holes in their truck beds. The mount has a plate connected by four bolts, allowing the stainless steel mount to easily and securely attach to the inside of the stake hole for a no-drill installation. Kit includes 18' of quality Firestik coax cable with a low-profile, weather-resistant ring end. Perfect for single or dual antenna setups, this mount creates a sturdy mounting platform that can support antennas up to 5'. Learn More

13 Item(s)

per page

List  Grid 

Set Descending Direction

Currently Shopping by

  1. Product Type:: Mount Remove This Item
  2. Mount Location:: Mirror / Bar Remove This Item, Vertical Surface / Side Mount Remove This Item, Other Remove This Item
  3. Manufacturer:: Firestik Remove This Item, Cobra Remove This Item, Uniden Remove This Item, Workman Remove This Item
Clear All

Shopping Options

Price
Product Type:
  1. Complete Kit (1)
  2. Radio (1)
  3. Antenna (1)
  4. Mount (13)
Radio Features:
  1. Public Address (1)
  2. Backlit Display (1)
Mount Location:
  1. Hood / Fender (8)
  2. Flat Surface (Roof, Bumper) (13)
  3. Mirror / Bar (5)
  4. Vertical Surface / Side Mount (7)
  5. Trunk / Hatch (7)
  6. Other (10)
Manufacturer:
  1. Firestik (12)
  2. Uniden (1)
  3. Wilson (1)
  4. Workman (2)
  5. More ...


© 2012 Right Channel Radios