Jeep & Off-Road CB Radio Equipment

What You Should Know:

Equipment: We recommend fiberglass antennas almost exclusively, as they hold up to the rigors of off-road driving and can be mounted just about anywhere. Radios must be both durable AND compact. The Uniden 510 Show More...
and Cobra 75 radios fit the bill nicely and are our two best-selling off-road CB models. We also recommend stainless steel mounting hardware and RG8X coax, which is beefier and better shielded than standard grade coax. To protect your antenna and off-road vehicle, we suggest a spring for the inevitable impact that will occur.  

Mounting Considerations: If available, a vehicle-specific mount is typically the best option in terms of integration and convenience. We stock custom mounts for Jeep Wranglers, FJ Cruiser, Hummers and Toyota T100s. We also have a large number of Ford, Chevy/GMC and Dodge hood mounts in our CB Pick-up Truck category. General hood channel and rear bumper/tire carrier installations are also popular. If mounting on a swinging tire carrier, make sure that it's properly grounded to the chassis, as many are insulated. As always, the longer your antenna -- and the higher up you mount it -- the better your range will be.

(Hide Information)

14 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Uniden Jeep Kit

    Uniden 510 Jeep & Off-Road Kit

    32 Review(s) | Add Your Review

    From: $119.95

    To: $156.90

    If you're hunting for an off-road CB radio package, but you'd prefer not to spend a fortune on a new install, this kit is for you! We worked closely with off-road owners to create an affordable yet durable package to simplify shopping and installation. This kit is built around the Uniden 510 radio, known for its no-frills, compact design. And its legendary reputation for reliability makes it a top pick with our off-road and industrial customers. We also include a durable Firestik or Wilson antenna, choice of mounting hardware, high-grade coax and SWR meter -- everything you need for a complete install! Get a proven, trail-ready install without the hours of shopping and research with the Uniden Jeep & Off-Road Kit. Learn More
  2. Firestik MK-J4R CB Hood Mounting Kit

    Jeep Wrangler Hood CB Mounting Kit (1997 - 2006)

    3 Review(s) | Add Your Review

    $29.95

    This mounting kit was specifically for 1997 - 2006 Jeep Wranglers. The stainless steel mount attaches to the front fender lip under the vehicle's hood and can be mounted on either side of the vehicle. You won't be able to see any mounting holes or hardware after installation, because everything is hidden under the hood. This Firestik mini-kit also includes 18' of quality FireRing CB coax with a low-profile, weather-resistant ring connection. Recommended for antennas up to 4' tall. Learn More
  3. Hummer CB Antenna Mount

    Hummer CB Antenna Mount

    $14.95

    Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More
  4. Toyota Hood Mount (1993-1998)

    Toyota T100 CB Antenna Mount

    $24.95

    This mount is a perfect choice for Toyota T100 trucks built between 1993 and 1998. Designed to attach to the driver side hood fender, the mount follows the contour of the truck for that "factory" install look. This mount is compatible with ring or terminal end coax and can support a 4' CB antenna. Learn More
  5. 2007+ Jeep Wrangler Fender Mount

    Jeep CB Antenna Fender Mount (2007+)

    1 Review(s) | Add Your Review

    $24.95

    If you want a factory look without taking a drill to your vehicle, the 2007+ Jeep mount is ideal! This antenna hood mount is designed for 2007 and newer Jeep Wrangler. The mount attaches securely to existing holes on the driver or passenger side of the fender. Recommended for antennas up to 4' tall. For older jeeps, please see this hood mounting kit which fits Jeeps made prior to 2007. Learn More
  6. Firestik CB Antenna Spring SS-3M

    Medium CB Antenna Spring

    6 Review(s) | Add Your Review

    $9.99

    Protect your antenna, mount and vehicle from blows to the antenna with this durable antenna spring. Built from stainless steel, this medium spring is rust- and weather-resistant. Designed for antennas up to 3' tall. For larger antennas, we recommend a heavy-duty spring. Learn More
  7. Firestik CB Antenna Spring SS-3H

    Heavy-Duty CB Antenna Spring

    20 Review(s) | Add Your Review

    $12.95

    Designed for CB antennas up to 5' tall, this heavy-duty spring will protect your antenna from snapping or bending. Built from stainless steel, this durable spring is rust- and weather-resistant. For antennas longer than 5', or for heavy center-load antennas, we recommend a super heavy-duty spring. Learn More
  8. Firestik K-1A CB Quick Disconnect

    Firestik CB Antenna Quick Disconnect

    29 Review(s) | Add Your Review

    $16.95

    Out of stock

    This premium disconnect is our best-selling CB disconnect and the one we recommend for general CB use! This Firestik CB disconnect makes removing your antenna fast and easy, which comes in handy in low-clearance areas. Simply push down and rotate, and your antenna pops off -- no tools required! Built with a stainless steel locking pin and spring, this accessory is designed to last. Recommended for fiberglass antennas up to 5' tall. Learn More
  9. Jeep Wrangler Hood Mount

    Jeep Wrangler CB Antenna Hood Mount (1997 - 2006)

    2 Review(s) | Add Your Review

    $15.95

    Designed specifically for Jeep Wranglers, this CB antenna hood fits 1997 - 2006 models. The stainless steel mount attaches to the front fender lip under the vehicle's hood and can be mounted on either side. After installation, no mounting holes or hardware are visible as all mounting hardware is hidden. This mount can also be used for a clean, professional roof rack install on Hummers, as seen here. Learn More
  10. Door Jamb CB Antenna Mount

    Door Jamb CB Antenna Mount

    3 Review(s) | Add Your Review

    $20.95

    This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More
  11. Firestik Stake Hole CB Mount Kit MK-294R

    Truck Stake Hole CB Antenna Kit

    2 Review(s) | Add Your Review

    $29.95

    With this Firestik kit, truck owners can mount their antennas using the stake holes in their truck beds. The mount has a plate connected by four bolts, allowing the stainless steel mount to easily and securely attach to the inside of the stake hole for a no-drill installation. Kit includes 18' of quality Firestik coax cable with a low-profile, weather-resistant ring end. Perfect for single or dual antenna setups, this mount creates a sturdy mounting platform that can support antennas up to 5'. Learn More
  12. Door Jamb CB Antenna Mount (Lug)

    Door Jamb CB Antenna Mount (Lug)

    3 Review(s) | Add Your Review

    $17.95

    This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. The lug stud requires a terminal or ring-style CB coax. Learn More
  13. Door Jamb CB Antenna Mount Kit

    Door Jamb CB Antenna Mount Kit

    2 Review(s) | Add Your Review

    $29.95

    This kit features a unique CB mount designed for installation on a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Kit includes 18' of quality RG8X CB coax cable. Learn More
  14. Firestik Deep Channel CB Antenna Hood Mount

    Deep Hood Channel Mount

    2 Review(s) | Add Your Review

    $12.95

    Firestik's Deep Hood Channel Mount is ideal for vehicles with deep hood channels, such as Chevy or Ford trucks. However, this mount is universal and can mount in either a hood or trunk channel, so long as the mounting surface is flat. This mount can support antennas up to 4' tall and includes a lug-style antenna stud, which requires a terminal or ring-style coax cable. Learn More

14 Item(s)

per page

List  Grid 

Set Descending Direction

Currently Shopping by

  1. Mount Location:: Hood / Fender Remove This Item, Other Remove This Item
  2. Manufacturer:: Firestik Remove This Item, Accessories Unlimited Remove This Item
Clear All

Shopping Options

Price
Product Type:
  1. Complete Kit (1)
  2. Radio (1)
  3. Antenna (1)
  4. Mount (14)
Radio Features:
  1. Public Address (1)
  2. Backlit Display (1)
Mount Location:
  1. Hood / Fender (6)
  2. Flat Surface (Roof, Bumper) (12)
  3. Mirror / Bar (4)
  4. Vertical Surface / Side Mount (6)
  5. Trunk / Hatch (3)
  6. Other (9)
Manufacturer:
  1. Firestik (12)
  2. Uniden (1)
  3. Wilson (1)
  4. Workman (5)
  5. More ...


© 2012 Right Channel Radios