|Model / SKU:||Firestik SS134|
|Recommended for:||Pickup trucks. This mount was specifically designed for the flat side mirror arms commonly found on pickups, but can also be attached to flat surfaces by removing the clamp.|
|Compatible with:||All fiberglass and center-load antennas that use a standard 3/8" x 24 threaded base.|
|Installation Notes:||Remove the bolts and lower part of the clamp. Slide the upper and lower ends of the clamp around the mirror support arm and then reattach the clamp.|
|Mount Location:||Flat Surface (Roof, Bumper), Mirror / Bar|
|Stud Type:||Lug (Ring and Terminal)|
|Product Includes:||Clamp-on mount, lug-style antenna stud
Antenna and coax sold separately
Firestik CB Antenna Mount: These stainless steel mounts were specifically designed for the flat side mirror arms commonly found on pickup trucks. When used in this manner, there's no need to drill any holes in the vehicle or mirror arm. The upper bracket is 4.6" (117mm) long by 1" (25mm) wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4" (36mm) wide. If the lower clamp is omitted, the upper bracket will also serve as a flat mount for installations with a horizontal surface. For general use, we recommend using these brackets with antennas up to 4' (1.2m) tall..
- Recommended for antennas up to 4'
- Ring or terminal coax attachment
- Stainless steel construction
- Standard 3/8" x 24 antenna base
- Two-year warranty