Jeep Hood Kit - Firestik CB Antenna Mounting

Firestik CB Antenna Mounting Kit: This kit was specifically designed for the 1997 and newer Jeep Wranglers. The mounting bracket attaches to the front fender lip under the vehicles hood (either left or right side). Through testing we have found that having the CB antenna in front of the driver is a better option than the popular bumper type mounts. With the mount in front, the driver has constant visual contact with the CB antenna. There is nothing worse than breaking your antenna in the middle of a trail run because you were unable to see that it was getting into trouble. We also prefer to have the antenna on the drivers side of the vehicle as most obstructions will be found hanging over the outer edges of the roads or trails. All of the supplied stainless steel mounting hardware is hidden under the hood. The bracket is 2" (51mm) wide by 3" (76mm) long. The kit includes a stainless steel mount, 18 ft (5.5m) of professional grade Fire-Flex coaxial cable with FireRing connection and a FREE microphone hanger.

Note: The PL-259 connector (radio screw-on end) is supplied in this kit but is NOT installed on the coax cable. This allows the cable to be routed into the vehicle through a smaller (0.375") hole. After the connector is placed on the coax, the center must be soldered to the PL connector.