CB Antenna Mounts
What You Should Know:
-
CB Ball Mount and Spring
$34.95The ball mount and heavy-duty spring securely mount to a vertical surface and work well with large antennas. Once mounted, the ball can be rotated to adjust the antenna's angle. This combo package includes a lug-style antenna stud that's compatible with ring- and terminal-end coax cables. Product may differ slightly from picture. Learn More -
5" CB Magnet Mount
$24.95The 5" CB magnet mount is perfect for anyone who wants to mount a fiberglass antenna to a magnet base. This mount is recommended for CB antennas up to 4' in length and can be easily installed on any flat metallic surface. Learn More -
Trunk Lip CB Antenna Mounting Kit
$26.95The Firestik trunk-lip kit allows you to mount a CB antenna on the edge of a car trunk, usually between the trunk deck and the rear window. There's no drilling required, because the mount clamps to the trunk edge when you tighten the two set screws. The rear side of the bracket has support feet with rubber bumpers to protect the vehicle finish. The mount comes with a lug-style antenna stud and an Allen wrench to tighten the screws, plus 18' of Firestik FireRing coax cable. Recommended for antennas up to 3' tall. Learn More -
Firestik DM4 Dome Mount (Lug)
$13.99A dome mount creates a permanent, rock-solid mounting surface that can accommodate CB antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. The included lug-style stud is compatible with ring and terminal end coax cables, both of which take up very little space and are ideal for installations where a headliner will be reinstalled. Learn More -
CB Molded Side Mount
$12.95This molded side mount is perfect for achieving a factory CB look. The mount's molded form makes the CB antenna look like a natural extension of the vehicle rather than an aftermarket accessory. This mount attaches to a vertical surface, accepts standard CB antenna threads, and is compatible with terminal-end coax cables. Learn More -
CB Antenna Triple Magnet Mount
$39.95This sturdy magnet mount is ideal for installing larger fiberglass or trucker-style antennas. With three 5" magnets, this mount can support antennas of 5' or longer while holding securely to the vehicle at highway speeds. If you have a large CB antenna that you'd like to use with a magnet mount, the Triple Magnet Mount is the obvious choice! Learn More -
Firestik Dome Mount Kit
$29.95With this kit, you'll get the versatile Firestik Dome Mount plus 18' of FireRing coax cable. The dome mount creates a permanent, rock-solid CB antenna mounting surface that can accommodate antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. The included Firestik CB coax cable has a ring-style connection that takes up very little space and is ideal for installations where a headliner will be reinstalled. Learn More -
3" Magnet Mount
$15.95This small magnet mount is ideal for mounting a 2' or light 3' fiberglass antenna on the roof or other flat surfaces of a vehicle. The magnet mount will stick directly to the vehicle, so no drilling is required. Mount comes with 12' of coax cable. Learn More -
Trunk Lip CB Antenna Mount
$10.95Use the Firestik trunk-lip mount to easily install a CB antenna on the edge of a vehicle trunk, usually between the trunk deck and the rear window. There's no drilling required, as two screws on the mount tighten from underneath to secure the bracket in place. The rear side of the bracket has support feet with rubber bumpers to protect the vehicle finish. The mount comes with a lug-style antenna stud and an Allen wrench to tighten the set screws. Recommended for antennas up to 3' tall. Learn More -
Outback Mount for Kenworth T2000 & Peterbuilt 387
$44.95This Outback mount makes it easy to install a CB antenna on a Kenworth T2000, Peterbilt 387 or any other large trucks with a vertical rear grab handle. Two bar clamps attach firmly to the grab handle using eight bolts, creating a rock-solid mounting platform for even the largest antennas. Can be mounted on either the driver or passenger side grab handles. Mount is 18" long and includes the antenna stud. Learn More -
Firestik DM4A Dome Mount
$14.99A dome mount is the perfect solution for creating a permanent, rock-solid CB antenna mounting surface that can accommodate antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. If you'll be removing a headliner for installation, you may want to consider the lug-style version of this mount, the Firestik DM4 Mount (see related products). The DM4's coax connection takes up much less space and is more suitable for tight headliner installations. Learn More -
Heavy-Duty CB Antenna Magnet Mount
$29.95Hustler gives you a solid product with this heavy-duty magnet mount. The mount features an oversize 5" magnet rated at 95 lbs. of pulling strength. You'll need both hands to pry this mount off your vehicle, so you don't have to worry about your antenna coming loose while driving on the Interstate. This mount includes 18' of coax cable and will accommodate all standard 3/8" x 24 antennas. Learn More -
Firestik Side Mount CB Antenna Kit
$29.95This side mount kit is perfect for achieving a clean, professional CB antenna installation. The molded "teardrop" mount from Firestik installs to any flat surface, concealing all wiring on the inside of the vehicle's chassis. This kit also includes 18' of Firestik quality, 95% shielded coax cable with terminal ends. You'll be hard-pressed to find a cleaner-looking installation solution than this side mount from Firestik! Learn More



