CB Antenna Mounts

What You Should Know:

Compatibility: All the mounts on this page will be compatible with any fiberglass or center-load CB antenna on the market, as they both use an industry standard 3/8" x 24 thread. Most mounts include a stud but, if not, you'll need to Show More...
buy one separately.  

Mounting Location: If you have a general idea of the location and/or mount you want, use the filtering menu on the left to narrow your search. If you're unsure which mount is best, please see our guide on Picking a Mounting Location.

(Hide Information)

14 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Dodge AUDODGE2 CB Antenna Mount 2004+

    Dodge Ram CB Antenna Hood Mount (2004-2008)

    2 Review(s) | Add Your Review

    $24.95

    This mount is designed to fit perfectly on 2004 through 2008 Dodge Ram trucks to create a factory-style install! The mount uses an existing hood bolt for a no-drill installation. It easily installs on the driver side of the hood and is shaped to match the hood's contour. Supports antennas up to 4' tall and includes an antenna stud compatible with terminal or ring-style CB coax cables. Learn More
  2. Truck Stakehole CB Antenna Mount

    Truck Stake Hole CB Antenna Mount

    4 Review(s) | Add Your Review

    $17.95

    This Firestik mount lets truck owners put their CB antennas in the stake holes of their truck beds. The mount includes a plate connected by four bolts, allowing the stainless steel mount to easily and securely attach to the inside of the stake hole for a no-drill installation. Mount includes a PL-259 compatible stud. Learn More
  3. Hummer CB Antenna Mount

    Hummer CB Antenna Mount

    $14.95

    Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More
  4. Dodge CB Antenna mount (1994 - 2003) SS184A

    Dodge CB Antenna Hood Mount (1994-2003)

    1 Review(s) | Add Your Review

    $14.95

    The perfect solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their CB antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be installed on either the driver or passenger side. Designed from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More
  5. Jeep Wrangler Hood Mount

    Jeep Wrangler CB Antenna Hood Mount (1997 - 2006)

    2 Review(s) | Add Your Review

    $15.95

    Designed specifically for Jeep Wranglers, this CB antenna hood fits 1997 - 2006 models. The stainless steel mount attaches to the front fender lip under the vehicle's hood and can be mounted on either side. After installation, no mounting holes or hardware are visible as all mounting hardware is hidden. This mount can also be used for a clean, professional roof rack install on Hummers, as seen here. Learn More
  6. Teraflex Jeep CB Antenna Mount CJ, YJ, TJ

    Teraflex 1987-2006 Jeep Tail Light CB Antenna Mount

    11 Review(s) | Add Your Review

    $34.95

    The Teraflex CB antenna mount offers a fast, customized way to mount a CB antenna to your CJ, YJ or TJ Jeep Wrangler. The mount is built to fit seamlessly between your Jeep's tail light assembly and the frame, making for a clean installation with no visible drill holes! Compatible with all CJ, YJ and TJ model Wranglers built between 1987 and 2006. Available for passenger or driver side tail light. Learn More
  7. Universal Hood Mount

    Adjustable Universal Hood Mount (Lug)

    5 Review(s) | Add Your Review

    $16.95

    Workman's Adjustable Universal Hood Mount (Lug) is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the antenna angle, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually any vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More
  8. Door Jamb CB Antenna Mount

    Door Jamb CB Antenna Mount

    3 Review(s) | Add Your Review

    $20.95

    This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More
  9. Firestik Deep Channel CB Antenna Hood Mount

    Deep Hood Channel Mount

    2 Review(s) | Add Your Review

    $12.95

    Firestik's Deep Hood Channel Mount is ideal for vehicles with deep hood channels, such as Chevy or Ford trucks. However, this mount is universal and can mount in either a hood or trunk channel, so long as the mounting surface is flat. This mount can support antennas up to 4' tall and includes a lug-style antenna stud, which requires a terminal or ring-style coax cable. Learn More
  10. Grabber Mount for CB Antennas

    Grabber Mount for CB Antennas

    $29.95

    Workman's grabber mount is truly the Swiss army knife of CB antenna mounts! You can attach this mount to virtually anything with an exposed edge that the grabber's teeth can clamp onto. To tighten the mount, simply turn the triangle-shaped screw, and the teeth come together. The mount has a pre-drilled 1/2" hole to accommodate standard antenna studs. The stud surface rotates 90 degrees for use on vertical and horizontal clamping surfaces. Made from rust-resistant stainless steel, this mount is built to endure years of weather and abuse. Learn More
  11. JK Jeep Wrangler CB Antenna Mount

    Teraflex JK Jeep Wrangler CB Spare Tire Mount

    11 Review(s) | Add Your Review

    $34.95

    Designed for JK Jeep Wranglers, this mount attaches seamlessly to the spare tire carrier using existing bolt holes to achieve a factory install look. The mount has a powder-coat finish for improved durability and appearance. Compatible with all JK Wranglers, including Rubicon and Unlimited models. Antenna stud sold separately. Learn More
  12. Dodge CB Antenna mount (1994 - 2003) SS184

    Dodge CB Antenna Hood Mount Lug (1994-2003)

    1 Review(s) | Add Your Review

    $12.95

    The perfect solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their CB antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be mounted on either the driver or passenger side. Includes a lug-style stud compatible with terminal or ring-style coax cable. Designed from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More
  13. Universal CB Antenna Hood Mount

    Adjustable Universal Hood Mount

    6 Review(s) | Add Your Review

    $19.95

    The Adjustable Universal Hood Mount is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the angle of the antenna, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually every vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More
  14. Door Jamb CB Antenna Mount (Lug)

    Door Jamb CB Antenna Mount (Lug)

    3 Review(s) | Add Your Review

    $17.95

    This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. The lug stud requires a terminal or ring-style CB coax. Learn More

14 Item(s)

per page

List  Grid 

Set Descending Direction

Currently Shopping by

  1. Mount Location:: Hood / Fender Remove This Item, Other Remove This Item
  2. Manufacturer:: Firestik Remove This Item, Workman Remove This Item, Teraflex Remove This Item
  3. Includes Coax:: Mount Only Remove This Item
Clear All

Shopping Options

Price
Mount Location:
  1. Hood / Fender (8)
  2. Flat Surface (Roof, Bumper) (11)
  3. Mirror / Bar (5)
  4. Vertical Surface / Side Mount (5)
  5. Trunk / Hatch (5)
  6. Other (7)
Manufacturer:
  1. Firestik (9)
  2. Workman (3)
  3. Teraflex (2)
  4. Accessories Unlimited (12)
  5. More ...
Includes Coax:
  1. Mount Only (14)
  2. Mount and Coax (5)
Stud Type:
  1. PL-259 (Barrel) (6)
  2. Lug (Ring and Terminal) (6)
  3. No Stud (2)
Material
  1. Stainless Steel (12)
  2. Powder Coated (2)


© 2012 Right Channel Radios