CB Antenna Mounts
What You Should Know:
-
Firestik 3-Way CB Mount (Lug)
$13.95The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any flat vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall. Learn More -
Clamp-On Firestik CB Antenna Mount (Lug)
$12.95These stainless steel mounts were specifically designed for the flat side mirror arms commonly found on pickup trucks. When used in this manner, there's no need to drill any holes in the vehicle or mirror arm. This mount can also be attached to any flat surface by removing the clamp. Lug-style antenna stud is compatible with ring or terminal end coax cables. Learn More -
Trunk Lip CB Antenna Mounting Kit
$26.95The Firestik trunk-lip kit allows you to mount a CB antenna on the edge of a car trunk, usually between the trunk deck and the rear window. There's no drilling required, because the mount clamps to the trunk edge when you tighten the two set screws. The rear side of the bracket has support feet with rubber bumpers to protect the vehicle finish. The mount comes with a lug-style antenna stud and an Allen wrench to tighten the screws, plus 18' of Firestik FireRing coax cable. Recommended for antennas up to 3' tall. Learn More -
Hummer CB Antenna Mount
$14.95Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More -
Toyota CB Antenna Hood Mount (2007+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2007+ Toyota mount is ideal! This antenna hood mount is designed for 2007 and newer Toyota Tundra, Sequoia, 4-Runner, and Rav 4. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Dodge CB Antenna Hood Mount Lug (1994-2003)
$12.95The perfect solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their CB antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be mounted on either the driver or passenger side. Includes a lug-style stud compatible with terminal or ring-style coax cable. Designed from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Door Jamb CB Antenna Mount (Lug)
$17.95This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. The lug stud requires a terminal or ring-style CB coax. Learn More -
Firestik Side Mount CB Antenna Kit
$29.95This side mount kit is perfect for achieving a clean, professional CB antenna installation. The molded "teardrop" mount from Firestik installs to any flat surface, concealing all wiring on the inside of the vehicle's chassis. This kit also includes 18' of Firestik quality, 95% shielded coax cable with terminal ends. You'll be hard-pressed to find a cleaner-looking installation solution than this side mount from Firestik! Learn More -
Ford CB Antenna Hood Mount (2008 - 2011)
$24.95If you want a factory look without taking a drill to your vehicle, the 2008 - 2012 Ford mount is ideal! This antenna hood mount is designed for 2008 - 2010 Ford F350, 2010 - 2011 F150/250, and 2011 Ford Escape. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Firestik Flat Universal CB Antenna Mount (Lug)
$7.45The Firestik flat universal can be used on any sturdy flat surface, making it one of the most versatile CB mounts available. Applications are, for the most part, only limited by your imagination. Built from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Firestik Dome Mount Kit
$29.95With this kit, you'll get the versatile Firestik Dome Mount plus 18' of FireRing coax cable. The dome mount creates a permanent, rock-solid CB antenna mounting surface that can accommodate antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. The included Firestik CB coax cable has a ring-style connection that takes up very little space and is ideal for installations where a headliner will be reinstalled. Learn More -
Universal Van CB Antenna Mount
$19.95This universal hood mount is compatible with most vans with tilted hood channels. The mount's tilted mounting surface allows for a vertical CB antenna installation despite the sloping hood channel. Recommended for antennas up to 4' tall. Learn More -
Jeep CB Antenna Fender Mount (2007+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2007+ Jeep mount is ideal! This antenna hood mount is designed for 2007 and newer Jeep Wrangler. The mount attaches securely to existing holes on the driver or passenger side of the fender. Recommended for antennas up to 4' tall. For older jeeps, please see this hood mounting kit which fits Jeeps made prior to 2007. Learn More -
Deep Hood Channel Mount
$12.95Firestik's Deep Hood Channel Mount is ideal for vehicles with deep hood channels, such as Chevy or Ford trucks. However, this mount is universal and can mount in either a hood or trunk channel, so long as the mounting surface is flat. This mount can support antennas up to 4' tall and includes a lug-style antenna stud, which requires a terminal or ring-style coax cable. Learn More -
Adjustable Universal Hood Mount (Lug)
$16.95Workman's Adjustable Universal Hood Mount (Lug) is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the antenna angle, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually any vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More -
CB Molded Side Mount
$12.95This molded side mount is perfect for achieving a factory CB look. The mount's molded form makes the CB antenna look like a natural extension of the vehicle rather than an aftermarket accessory. This mount attaches to a vertical surface, accepts standard CB antenna threads, and is compatible with terminal-end coax cables. Learn More -
Ford CB Antenna Hood Mount (2011 - 2012)
$24.95If you want a factory look without taking a drill to your vehicle, the 2011 - 2012 Ford mount is ideal! This antenna hood mount is designed for 2011 - 2012 Ford F350 & 2012 F250. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Firestik DM4 Dome Mount (Lug)
$13.99A dome mount creates a permanent, rock-solid mounting surface that can accommodate CB antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. The included lug-style stud is compatible with ring and terminal end coax cables, both of which take up very little space and are ideal for installations where a headliner will be reinstalled. Learn More -
Trunk Lip CB Antenna Mount
$10.95Use the Firestik trunk-lip mount to easily install a CB antenna on the edge of a vehicle trunk, usually between the trunk deck and the rear window. There's no drilling required, as two screws on the mount tighten from underneath to secure the bracket in place. The rear side of the bracket has support feet with rubber bumpers to protect the vehicle finish. The mount comes with a lug-style antenna stud and an Allen wrench to tighten the set screws. Recommended for antennas up to 3' tall. Learn More -
Jeep Wrangler Hood CB Mounting Kit (1997 - 2006)
$29.95This mounting kit was specifically for 1997 - 2006 Jeep Wranglers. The stainless steel mount attaches to the front fender lip under the vehicle's hood and can be mounted on either side of the vehicle. You won't be able to see any mounting holes or hardware after installation, because everything is hidden under the hood. This Firestik mini-kit also includes 18' of quality FireRing CB coax with a low-profile, weather-resistant ring connection. Recommended for antennas up to 4' tall. Learn More -
Chevy GMC CB Antenna Hood Mount (2010+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2010+ GMC mount is ideal! This antenna hood mount is designed for 2010 and newer GMC/Chevy trucks, Chevy Avalanches, Tahoes, Suburbans, and will fit the Toyota Tacoma. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Chevy Silverado CB Antenna Hood Mount (2007-2010)
$24.95If you own a Chevy Silverado and are looking for a CB mount with that "factory install" look, this is the mount for you! It's designed to attach to the hood rail using existing bolts on the truck. No drilling required for a fast, easy installation! The mount's lug-style antenna stud is compatible with ring-style or terminal CB coax cable. Recommended for antennas up to 4' tall. Learn More -
Dodge Ram CB Antenna Hood Mount (2004-2008)
$24.95This mount is designed to fit perfectly on 2004 through 2008 Dodge Ram trucks to create a factory-style install! The mount uses an existing hood bolt for a no-drill installation. It easily installs on the driver side of the hood and is shaped to match the hood's contour. Supports antennas up to 4' tall and includes an antenna stud compatible with terminal or ring-style CB coax cables. Learn More -
Toyota T100 CB Antenna Mount
$24.95This mount is a perfect choice for Toyota T100 trucks built between 1993 and 1998. Designed to attach to the driver side hood fender, the mount follows the contour of the truck for that "factory" install look. This mount is compatible with ring or terminal end coax and can support a 4' CB antenna. Learn More -
Chevy GMC CB Antenna Hood Mount (2002 - 2007)
$24.95If you want a factory look without taking a drill to your vehicle, the 2002 - 2007 GMC mount is ideal! This antenna hood mount is designed for 2002 and newer GMC/Chevy trucks, and for Chevy Avalanches, Tahoes and Suburbans. The mount attaches securely to existing holes in the driver's side of the hood frame, up top near the windshield. Recommended for antennas up to 4' tall. Learn More
Currently Shopping by
-
Stud Type:: Lug (Ring and Terminal)
-
Material: Stainless Steel , Other
Shopping Options
- Price
- Mount Location:
- Hood / Fender (18)
- Flat Surface (Roof, Bumper) (7)
- Mirror / Bar (2)
- Vertical Surface / Side Mount (3)
- Trunk / Hatch (4)
- Other (3)
- Manufacturer:
- Firestik (16)
- Workman (1)
- Accessories Unlimited (12)
- Generic (1)
- Includes Coax:
- Mount Only (24)
- Mount and Coax (6)
- Stud Type:
- PL-259 (Barrel) (20)
- Lug (Ring and Terminal) (30)
- Material
- Stainless Steel (24)
- Chrome (1)
- Other (6)