CB Antenna Mounts
What You Should Know:
-
Grabber Mount for CB Antennas
$29.95Workman's grabber mount is truly the Swiss army knife of CB antenna mounts! You can attach this mount to virtually anything with an exposed edge that the grabber's teeth can clamp onto. To tighten the mount, simply turn the triangle-shaped screw, and the teeth come together. The mount has a pre-drilled 1/2" hole to accommodate standard antenna studs. The stud surface rotates 90 degrees for use on vertical and horizontal clamping surfaces. Made from rust-resistant stainless steel, this mount is built to endure years of weather and abuse. Learn More -
Hummer CB Antenna Mount
$14.95Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More -
Toyota CB Antenna Hood Mount (2007+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2007+ Toyota mount is ideal! This antenna hood mount is designed for 2007 and newer Toyota Tundra, Sequoia, 4-Runner, and Rav 4. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Adjustable Universal Hood Mount
$19.95The Adjustable Universal Hood Mount is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the angle of the antenna, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually every vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More -
Firestik Flat Universal CB Antenna Mount (Lug)
$7.45The Firestik flat universal can be used on any sturdy flat surface, making it one of the most versatile CB mounts available. Applications are, for the most part, only limited by your imagination. Built from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Door Jamb CB Antenna Mount (Lug)
$17.95This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. The lug stud requires a terminal or ring-style CB coax. Learn More -
Ford CB Antenna Hood Mount (2008 - 2011)
$24.95If you want a factory look without taking a drill to your vehicle, the 2008 - 2012 Ford mount is ideal! This antenna hood mount is designed for 2008 - 2010 Ford F350, 2010 - 2011 F150/250, and 2011 Ford Escape. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Dodge CB Antenna Hood Mount (1994-2003)
$14.95The perfect solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their CB antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be installed on either the driver or passenger side. Designed from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Heavy-Duty CB Antenna Mirror Mount
$24.95This heavy-duty oversize CB mirror mount is intended for serious mounting applications and heavy antennas. Four mounting bolts and dual mirror grooves ensure a tight fit. Pair the heavy-duty mirror mount with beefy CB antennas 5' and longer for a secure installation. Learn More -
Clamp-On Firestik CB Antenna Mount (Lug)
$12.95These stainless steel mounts were specifically designed for the flat side mirror arms commonly found on pickup trucks. When used in this manner, there's no need to drill any holes in the vehicle or mirror arm. This mount can also be attached to any flat surface by removing the clamp. Lug-style antenna stud is compatible with ring or terminal end coax cables. Learn More -
Universal Van CB Antenna Mount
$19.95This universal hood mount is compatible with most vans with tilted hood channels. The mount's tilted mounting surface allows for a vertical CB antenna installation despite the sloping hood channel. Recommended for antennas up to 4' tall. Learn More -
Jeep CB Antenna Fender Mount (2007+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2007+ Jeep mount is ideal! This antenna hood mount is designed for 2007 and newer Jeep Wrangler. The mount attaches securely to existing holes on the driver or passenger side of the fender. Recommended for antennas up to 4' tall. For older jeeps, please see this hood mounting kit which fits Jeeps made prior to 2007. Learn More -
Firestik 3-Way CB Mount
$15.95The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall. Learn More -
Jeep Wrangler CB Antenna Hood Mount (1997 - 2006)
$15.95Designed specifically for Jeep Wranglers, this CB antenna hood fits 1997 - 2006 models. The stainless steel mount attaches to the front fender lip under the vehicle's hood and can be mounted on either side. After installation, no mounting holes or hardware are visible as all mounting hardware is hidden. This mount can also be used for a clean, professional roof rack install on Hummers, as seen here. Learn More -
Firestik Flat Universal CB Antenna Mount
$9.45The Firestik flat universal can be used on any sturdy flat surface, making it one of the most versatile CB mounts available. Applications are, for the most part, only limited by your imagination. Built from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Wide Flat CB Antenna Mount
$13.95The stainless steel Wide Flat Mount from Firestik is heavy-duty and universal. This mount attaches to any flat surface using four bolts or screws -- placement is only limited by your imagination! Additionally, the mounting tab is large enough to accomodate a dome mount, such as the Firestik DM4A, to create an even sturdier base for beefier antennas. Recommended for any size antenna and comes with a PL-259 compatible antenna stud. Learn More -
Ford CB Antenna Hood Mount (2011 - 2012)
$24.95If you want a factory look without taking a drill to your vehicle, the 2011 - 2012 Ford mount is ideal! This antenna hood mount is designed for 2011 - 2012 Ford F350 & 2012 F250. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Deep Hood Channel Mount
$12.95Firestik's Deep Hood Channel Mount is ideal for vehicles with deep hood channels, such as Chevy or Ford trucks. However, this mount is universal and can mount in either a hood or trunk channel, so long as the mounting surface is flat. This mount can support antennas up to 4' tall and includes a lug-style antenna stud, which requires a terminal or ring-style coax cable. Learn More -
Adjustable Universal Hood Mount (Lug)
$16.95Workman's Adjustable Universal Hood Mount (Lug) is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the antenna angle, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually any vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More -
Clamp-On Firestik CB Antenna Mount
$14.95These stainless steel mounts were specifically designed for the side mirror arms commonly found on pickup trucks. When used in this manner, there's no need to drill holes in the vehicle or mirror arm. This mount can also be bolted to any flat surface by removing the clamp. Stainless steel PL-259-compatible antenna stud included. Learn More -
Door Jamb CB Antenna Mount
$20.95This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Dodge CB Antenna Hood Mount Lug (1994-2003)
$12.95The perfect solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their CB antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be mounted on either the driver or passenger side. Includes a lug-style stud compatible with terminal or ring-style coax cable. Designed from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Firestik 3-Way CB Mount (Lug)
$13.95The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any flat vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall. Learn More -
Chevy Silverado CB Antenna Hood Mount (2007-2010)
$24.95If you own a Chevy Silverado and are looking for a CB mount with that "factory install" look, this is the mount for you! It's designed to attach to the hood rail using existing bolts on the truck. No drilling required for a fast, easy installation! The mount's lug-style antenna stud is compatible with ring-style or terminal CB coax cable. Recommended for antennas up to 4' tall. Learn More -
Ford F250 & F350 CB Antenna Mount (1999 - 2009)
$24.95This stainless steel hood mount is a perfect choice for the owner of a 1999 to 2009 Ford F250 or F350. The mount attaches firmly to the hood rail on the driver side of the truck and can support antennas up to 4' tall. The mount includes a rust-resistant, stainless steel lug-style antenna stud that's compatible with ring or terminal end coax. Learn More
Currently Shopping by
-
Includes Coax:: Mount Only
-
Stud Type:: PL-259 (Barrel) , Lug (Ring and Terminal)
-
Material: Stainless Steel
Shopping Options
- Price
- Mount Location:
- Hood / Fender (20)
- Flat Surface (Roof, Bumper) (9)
- Mirror / Bar (6)
- Vertical Surface / Side Mount (5)
- Trunk / Hatch (4)
- Other (5)
- Manufacturer:
- Firestik (16)
- Workman (3)
- Accessories Unlimited (12)
- Astatic (1)
- Includes Coax:
- Mount Only (32)
- Mount and Coax (7)
- Stud Type:
- PL-259 (Barrel) (11)
- Lug (Ring and Terminal) (21)
- Material
- Stainless Steel (32)
- Aluminum (4)
- Powder Coated (1)
- Chrome (2)
- Other (4)