CB Antenna Mounts
What You Should Know:
-
Wide Flat CB Antenna Mount
$13.95The stainless steel Wide Flat Mount from Firestik is heavy-duty and universal. This mount attaches to any flat surface using four bolts or screws -- placement is only limited by your imagination! Additionally, the mounting tab is large enough to accomodate a dome mount, such as the Firestik DM4A, to create an even sturdier base for beefier antennas. Recommended for any size antenna and comes with a PL-259 compatible antenna stud. Learn More -
Door Jamb CB Antenna Mount Kit
$29.95This kit features a unique CB mount designed for installation on a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Kit includes 18' of quality RG8X CB coax cable. Learn More -
3" Magnet Mount
$15.95This small magnet mount is ideal for mounting a 2' or light 3' fiberglass antenna on the roof or other flat surfaces of a vehicle. The magnet mount will stick directly to the vehicle, so no drilling is required. Mount comes with 12' of coax cable. Learn More -
Toyota CB Antenna Hood Mount (2007+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2007+ Toyota mount is ideal! This antenna hood mount is designed for 2007 and newer Toyota Tundra, Sequoia, 4-Runner, and Rav 4. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Adjustable Universal Hood Mount (Lug)
$16.95Workman's Adjustable Universal Hood Mount (Lug) is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the antenna angle, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually any vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More -
Firestik 3-Way CB Mount (Lug)
$13.95The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any flat vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall. Learn More -
Clamp-On Firestik CB Antenna Mount
$14.95These stainless steel mounts were specifically designed for the side mirror arms commonly found on pickup trucks. When used in this manner, there's no need to drill holes in the vehicle or mirror arm. This mount can also be bolted to any flat surface by removing the clamp. Stainless steel PL-259-compatible antenna stud included. Learn More -
Door Jamb CB Antenna Mount
$20.95This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Firestik Side Mount CB Antenna Kit
$29.95This side mount kit is perfect for achieving a clean, professional CB antenna installation. The molded "teardrop" mount from Firestik installs to any flat surface, concealing all wiring on the inside of the vehicle's chassis. This kit also includes 18' of Firestik quality, 95% shielded coax cable with terminal ends. You'll be hard-pressed to find a cleaner-looking installation solution than this side mount from Firestik! Learn More -
Firestik DM4A Dome Mount
$14.99A dome mount is the perfect solution for creating a permanent, rock-solid CB antenna mounting surface that can accommodate antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. If you'll be removing a headliner for installation, you may want to consider the lug-style version of this mount, the Firestik DM4 Mount (see related products). The DM4's coax connection takes up much less space and is more suitable for tight headliner installations. Learn More -
Ford CB Antenna Hood Mount (2008 - 2011)
$24.95If you want a factory look without taking a drill to your vehicle, the 2008 - 2012 Ford mount is ideal! This antenna hood mount is designed for 2008 - 2010 Ford F350, 2010 - 2011 F150/250, and 2011 Ford Escape. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Dodge CB Antenna Hood Mount (1994-2003)
$14.95The perfect solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their CB antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be installed on either the driver or passenger side. Designed from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Heavy-Duty CB Antenna Magnet Mount
$29.95Hustler gives you a solid product with this heavy-duty magnet mount. The mount features an oversize 5" magnet rated at 95 lbs. of pulling strength. You'll need both hands to pry this mount off your vehicle, so you don't have to worry about your antenna coming loose while driving on the Interstate. This mount includes 18' of coax cable and will accommodate all standard 3/8" x 24 antennas. Learn More -
CB Molded Side Mount
$12.95This molded side mount is perfect for achieving a factory CB look. The mount's molded form makes the CB antenna look like a natural extension of the vehicle rather than an aftermarket accessory. This mount attaches to a vertical surface, accepts standard CB antenna threads, and is compatible with terminal-end coax cables. Learn More -
Grabber Mount for CB Antennas
$29.95Workman's grabber mount is truly the Swiss army knife of CB antenna mounts! You can attach this mount to virtually anything with an exposed edge that the grabber's teeth can clamp onto. To tighten the mount, simply turn the triangle-shaped screw, and the teeth come together. The mount has a pre-drilled 1/2" hole to accommodate standard antenna studs. The stud surface rotates 90 degrees for use on vertical and horizontal clamping surfaces. Made from rust-resistant stainless steel, this mount is built to endure years of weather and abuse. Learn More -
Trunk Lip CB Antenna Mounting Kit
$26.95The Firestik trunk-lip kit allows you to mount a CB antenna on the edge of a car trunk, usually between the trunk deck and the rear window. There's no drilling required, because the mount clamps to the trunk edge when you tighten the two set screws. The rear side of the bracket has support feet with rubber bumpers to protect the vehicle finish. The mount comes with a lug-style antenna stud and an Allen wrench to tighten the screws, plus 18' of Firestik FireRing coax cable. Recommended for antennas up to 3' tall. Learn More -
Hummer CB Antenna Mount
$14.95Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More -
5" CB Magnet Mount
$24.95The 5" CB magnet mount is perfect for anyone who wants to mount a fiberglass antenna to a magnet base. This mount is recommended for CB antennas up to 4' in length and can be easily installed on any flat metallic surface. Learn More -
Jeep CB Antenna Fender Mount (2007+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2007+ Jeep mount is ideal! This antenna hood mount is designed for 2007 and newer Jeep Wrangler. The mount attaches securely to existing holes on the driver or passenger side of the fender. Recommended for antennas up to 4' tall. For older jeeps, please see this hood mounting kit which fits Jeeps made prior to 2007. Learn More -
Adjustable Universal Hood Mount
$19.95The Adjustable Universal Hood Mount is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the angle of the antenna, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually every vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More -
Heavy-Duty CB Antenna Mirror Mount
$24.95This heavy-duty oversize CB mirror mount is intended for serious mounting applications and heavy antennas. Four mounting bolts and dual mirror grooves ensure a tight fit. Pair the heavy-duty mirror mount with beefy CB antennas 5' and longer for a secure installation. Learn More -
Firestik Flat Universal CB Antenna Mount (Lug)
$7.45The Firestik flat universal can be used on any sturdy flat surface, making it one of the most versatile CB mounts available. Applications are, for the most part, only limited by your imagination. Built from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More -
Door Jamb CB Antenna Mount (Lug)
$17.95This unique CB mount can be installed in a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle with a door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. The lug stud requires a terminal or ring-style CB coax. Learn More -
Firestik 3-Way Dual CB Antenna Kit
$69.95This Firestik kit is perfect for mounting and wiring dual CB antennas! It features the handy three-way mount, our most popular CB antenna mount due to its versatility and durability. This stainless steel mount can be installed on vertical and horizontal bars, and on flat vertical surfaces as an "L" bracket. If you have a strong mounting surface, these mounts will easily support antennas up to 5' tall. Kit includes 18' of quality, 95% shielded RG59 coax cable for connecting the mounts and antennas to your radio. Learn More -
Firestik DM4 Dome Mount (Lug)
$13.99A dome mount creates a permanent, rock-solid mounting surface that can accommodate CB antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. The included lug-style stud is compatible with ring and terminal end coax cables, both of which take up very little space and are ideal for installations where a headliner will be reinstalled. Learn More
Currently Shopping by
-
Stud Type:: PL-259 (Barrel)
, Lug (Ring and Terminal) -
Material: Stainless Steel , Other
Shopping Options
- Price
- Mount Location:
- Hood / Fender (23)
- Flat Surface (Roof, Bumper) (20)
- Magnet (4)
- Mirror / Bar (8)
- Vertical Surface / Side Mount (9)
- Trunk / Hatch (9)
- Other (7)
- Manufacturer:
- Firestik (28)
- Workman (6)
- Hustler (1)
- Accessories Unlimited (12)
- More ...
- Includes Coax:
- Mount Only (36)
- Mount and Coax (14)
- Stud Type:
- PL-259 (Barrel) (20)
- Lug (Ring and Terminal) (30)
- Material
- Stainless Steel (39)
- Aluminum (4)
- Powder Coated (1)
- Chrome (2)
- Other (11)