CB Radio Accessories

This black coax boot fits over the PL-259 coax connection and protects the connection from dirt, dust and mud. Ideal for off-road users, this coax boot will extend the life of your coax cable. Learn More

This PL-259 connector is perfect if you need to replace or re-solder a connection for your CB coax cable.

Learn More

This co-phase connector is designed to work with RG59 coax cable ONLY and is used to repair a co-phase coax cable. Use this connector if you've damaged your co-phase coax cable or are creating your own co-phase system from raw RG59 coax. Learn More

This mounting kit was specifically for 1997 - 2006 Jeep Wranglers. The stainless steel mount attaches to the front fender lip under the vehicle's hood and can be mounted on either side of the vehicle. You won't be able to see any mounting holes or hardware after installation, because everything is hidden under the hood. This Firestik mini-kit also includes 18' of quality FireRing CB coax with a low-profile, weather-resistant ring connection. Recommended for antennas up to 4' tall. Learn More

With this kit, you'll get the versatile Firestik Dome Mount plus 18' of FireRing coax cable. The dome mount creates a permanent, rock-solid CB antenna mounting surface that can accommodate antennas up to 5' tall, including fiberglass and medium-sized trucker antennas like the Wilson 2000. The included Firestik CB coax cable has a ring-style connection that takes up very little space and is ideal for installations where a headliner will be reinstalled. Learn More

Featuring one of our most popular general purpose mounts, this kit is an excellent option for hood, trunk or hatchback mounting! The mount comes with a swivel that lets you adjust the antenna angle -- perfect for vehicles with a steep angle hood or hatchback. This kit fits virtually every vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' tall. Kit also includes 18' of high-quality RG8X 95% shielded coax cable. Learn More

The Firestik trunk-lip kit allows you to mount a CB antenna on the edge of a car trunk, usually between the trunk deck and the rear window. There's no drilling required, because the mount clamps to the trunk edge when you tighten the two set screws. The rear side of the bracket has support feet with rubber bumpers to protect the vehicle finish. The mount comes with a lug-style antenna stud and an Allen wrench to tighten the screws, plus 18' of Firestik FireRing coax cable. Recommended for antennas up to 3' tall. Learn More

This packaged kit from Firestik is a great solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be mounted on either the driver or passenger side. Includes 18' of quality Firestik coax with a compatible low-profile, weather-resistant ring connection. Designed from rust-resistant stainless steel, the mount is recommended for antennas up to 4' tall. Learn More

This 20-amp noise filter reduces the electrical noise that makes listening to incoming CB transmissions difficult. The filter easily installs using a 3-pin power cord, which plugs directly into the back of most medium to large CB radios. If your radio does not accept a 3-pin plug, you can easily cut the attachment off and match the positive and negative wires.

Learn More

This remote connector box allows you to use a single Cobra 75 WX ST CB radio in multiple vehicles! The Cobra 75 includes a screw-off connector, which makes attaching and removing the radio fast and easy. You can transfer the radio to any vehicle with a remote connector box and its own CB antenna. For additional information, please see these Cobra 75 WX ST pictures.

Learn More

Firestik's Match-Maker CB antenna splitter is perfect for CB users who want to use their CB antennas to receive AM and FM radio. Ideal for drivers who only want one antenna on their vehicles!

Learn More

This side mount kit is perfect for achieving a clean, professional CB antenna installation. The molded "teardrop" mount from Firestik installs to any flat surface, concealing all wiring on the inside of the vehicle's chassis. This kit also includes 18' of Firestik quality, 95% shielded coax cable with terminal ends. You'll be hard-pressed to find a cleaner-looking installation solution than this side mount from Firestik! Learn More

With this Firestik kit, truck owners can mount their antennas using the stake holes in their truck beds. The mount has a plate connected by four bolts, allowing the stainless steel mount to easily and securely attach to the inside of the stake hole for a no-drill installation. Kit includes 18' of quality Firestik coax cable with a low-profile, weather-resistant ring end. Perfect for single or dual antenna setups, this mount creates a sturdy mounting platform that can support antennas up to 5'. Learn More

This Firestik kit features the three-way mount, our most popular CB antenna mount due to its versatility and durability! The stainless steel mount can be mounted on vertical and horizontal bars, and to vertical surfaces as an "L" bracket. If you have a strong mounting surface, these mounts will easily support antennas up to 5' tall. Kit includes 18' of quality, 95% shielded RG8X CB coax cable. Learn More

This double SO-238 UHF connector is perfect for connecting two pieces of coax cable. If you'd like to extend an existing coax, you'll need this accessory, plus another piece of coax cable. Learn More

Cobra's new CA MS4 remote CB microphone system allows you to talk on your CB radio hands-free. Place the headset on top of your head or around your neck, strategically position the push-to-talk button close to your gear shift or steering wheel, and you will never have to take your hands off the controls of your vehicle while talking on your CB! This mic system is compatible with all 4-pin CB radios and is the ideal solution for drivers who want to talk hands-free. Learn More

Made specifically for Freightliner Cascadia trucks, this heavy-duty, powder-coated CB mount uses existing bolt holes for quick, no-drill installation. This mount can support large CB antennas, has a 1/2" hole for installing a CB antenna stud (not included), and is available in both driver- and passenger-side versions. Ideal for Cascadia truck drivers who want a CB mount that's easy to install and will last a lifetime. Learn More

Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More

Replace or repair the tunable tip of your Firestik FS or FireFly antenna with Firestik's replacement kit. Includes the brass tuning screw, jam nut, rubber O-ring and a new plastic antenna cap. Learn More

If you're threading coax cable through a sharp metal hole or jagged surface, the Firestik grommets protect the cable from being damaged. Designed to attach inside a 3/8" hole, these plastic grommets wrap around the outer surface of the hole, creating safe passage for the coax.

Learn More

This kit features a unique CB mount designed for installation on a vehicle's door jamb or tailgate hatch. Once the mount is installed, the 180-degree swivel allows you to adjust the stud to ensure a straight, vertical antenna regardless of the mounting angle! This Firestik mount was designed for vans, pickup trucks and SUVs, but is versatile enough to mount on any vehicle door. Made from rust-resistant stainless steel and recommended for antennas up to 4' tall. Kit includes 18' of quality RG8X CB coax cable. Learn More

This Firestik kit is perfect for mounting and wiring dual CB antennas! It features the handy three-way mount, our most popular CB antenna mount due to its versatility and durability. This stainless steel mount can be installed on vertical and horizontal bars, and on flat vertical surfaces as an "L" bracket. If you have a strong mounting surface, these mounts will easily support antennas up to 5' tall. Kit includes 18' of quality, 95% shielded RG59 coax cable for connecting the mounts and antennas to your radio. Learn More

Use this AC adapter to charge your Cobra handheld CB radio from a standard wall outlet. Note: This product works as a charger but will not provide power to operate the radio when plugged in.

Learn More

Perfect for industrial and commercial applications, this lapel speaker microphone works nicely with compatible handheld CB radios. The unit features a push-to-talk button for easy transmitting, plus a built-in speaker to easily hear incoming transmission.

Learn More