CB Radio Accessories
We've got the CB radio accessory you need! With a large selection of microphones, speakers, PA horns, power cords, SWR meters and coax cable, you're sure to find what you're looking for at Right Channel Radios. To narrow your search, please select a category from the list at the left.
-
CB Antenna Stud Mount (PL-259)
$5.99This Firestik stud mount is our best-selling stud and the one we recommend for general CB applications! Instead of low-cost components, Firestik uses stainless steel, machined brass and oversized hex stock for a high-quality stud that will last. The SO-239 connection is compatible with all PL-259 style coax connections. For best performance, we recommend using with antennas 5' and shorter. If you'll be using a longer antenna, you'll want to consider a ball mount or an oversized, heavy-duty stud. Learn More -
Firestik 3-Way CB Mount
$15.95The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall. Learn More -
Super Heavy-Duty CB Antenna Spring
$24.95This is our beefiest CB antenna spring -- the one you'll want if you're using a Monkey Made, Predator, 102" whip or similarly large, heavy antenna. This spring provides flexibility and protection to large antennas without any flopping and swaying. The spring's stainless steel construction is weather- and rust-resistant and designed to last. Learn More -
Firestik CB Antenna Quick Disconnect
$16.95This premium disconnect is our best-selling CB disconnect and the one we recommend for general CB use! This Firestik CB disconnect makes removing your antenna fast and easy, which comes in handy in low-clearance areas. Simply push down and rotate, and your antenna pops off -- no tools required! Built with a stainless steel locking pin and spring, this accessory is designed to last. Recommended for fiberglass antennas up to 5' tall. Learn More -
Heavy-Duty CB Antenna Spring
$12.95Designed for CB antennas up to 5' tall, this heavy-duty spring will protect your antenna from snapping or bending. Built from stainless steel, this durable spring is rust- and weather-resistant. For antennas longer than 5', or for heavy center-load antennas, we recommend a super heavy-duty spring. Learn More -
Chevy GMC CB Antenna Hood Mount (2002 - 2007)
$24.95If you want a factory look without taking a drill to your vehicle, the 2002 - 2007 GMC mount is ideal! This antenna hood mount is designed for 2002 and newer GMC/Chevy trucks, and for Chevy Avalanches, Tahoes and Suburbans. The mount attaches securely to existing holes in the driver's side of the hood frame, up top near the windshield. Recommended for antennas up to 4' tall. Learn More -
Firestik FireRing Compatible Stud
$4.95This antenna stud is specifically designed to be used with Firestik's FireRing and other ring-style coax cables. Although standard lug-style studs like the K4 will generally work with ring coax connections, this stud has an extra-long bolt shaft that accomodates the thickness of the ring connection and ensures the bolt is threaded deeply into the stud. The result is a rock-solid, secure stud mount. Like all Firestik studs, this K4R is built with stainless steel, machined brass and oversize hex stock to ensure a high-quality stud that will last. Learn More -
CB Mirror Mount for Oversized Bars
$9.95This heavy-duty dual groove mirror mount is designed to attach to thick horizontal mirror arms or bars. Mount includes a long PL-259 antenna stud for additional support. The mount securely attaches using four bolts and is compatible with all 3/8" x 24 antennas. Learn More -
Heavy-Duty CB Quick Disconnect
$24.95This heavy-duty CB quick disconnect is intended for use with large, heavy antennas. Designed to support significant weight and torque, it's built from rust-resistant stainless steel and can be used with antennas from Monkey Made, Predator, 102" whips and other oversize antennas. Once installed, antenna removal is simple: Simply press down on the disconnect and twist, and your antenna is free! Learn More -
Horizontal Mirror Mount with HD Stud
$9.95This mount has a heavy-duty stud and double groove, allowing it to easily attach to horizontal mirror arms. The twin 1.5" bolts hold the mount firmly to the bar, while the HD stud supports larger antennas. Mount includes a PL-259 compatible antenna stud. Learn More -
Teraflex 1987-2006 Jeep Tail Light CB Antenna Mount
$34.95The Teraflex CB antenna mount offers a fast, customized way to mount a CB antenna to your CJ, YJ or TJ Jeep Wrangler. The mount is built to fit seamlessly between your Jeep's tail light assembly and the frame, making for a clean installation with no visible drill holes! Compatible with all CJ, YJ and TJ model Wranglers built between 1987 and 2006. Available for passenger or driver side tail light. Learn More -
Toyota T100 CB Antenna Mount
$24.95This mount is a perfect choice for Toyota T100 trucks built between 1993 and 1998. Designed to attach to the driver side hood fender, the mount follows the contour of the truck for that "factory" install look. This mount is compatible with ring or terminal end coax and can support a 4' CB antenna. Learn More -
Outback Mount for Kenworth T2000 & Peterbuilt 387
$44.95This Outback mount makes it easy to install a CB antenna on a Kenworth T2000, Peterbilt 387 or any other large trucks with a vertical rear grab handle. Two bar clamps attach firmly to the grab handle using eight bolts, creating a rock-solid mounting platform for even the largest antennas. Can be mounted on either the driver or passenger side grab handles. Mount is 18" long and includes the antenna stud. Learn More -
Clamp-On Firestik CB Antenna Mount
$14.95These stainless steel mounts were specifically designed for the side mirror arms commonly found on pickup trucks. When used in this manner, there's no need to drill holes in the vehicle or mirror arm. This mount can also be bolted to any flat surface by removing the clamp. Stainless steel PL-259-compatible antenna stud included. Learn More -
Ford CB Antenna Hood Mount (2011 - 2012)
$24.95If you want a factory look without taking a drill to your vehicle, the 2011 - 2012 Ford mount is ideal! This antenna hood mount is designed for 2011 - 2012 Ford F350 & 2012 F250. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Trunk Lip CB Antenna Mount
$10.95Use the Firestik trunk-lip mount to easily install a CB antenna on the edge of a vehicle trunk, usually between the trunk deck and the rear window. There's no drilling required, as two screws on the mount tighten from underneath to secure the bracket in place. The rear side of the bracket has support feet with rubber bumpers to protect the vehicle finish. The mount comes with a lug-style antenna stud and an Allen wrench to tighten the set screws. Recommended for antennas up to 3' tall. Learn More -
Deep Hood Channel Mount
$12.95Firestik's Deep Hood Channel Mount is ideal for vehicles with deep hood channels, such as Chevy or Ford trucks. However, this mount is universal and can mount in either a hood or trunk channel, so long as the mounting surface is flat. This mount can support antennas up to 4' tall and includes a lug-style antenna stud, which requires a terminal or ring-style coax cable. Learn More -
Adjustable Universal Hood Mount (Lug)
$16.95Workman's Adjustable Universal Hood Mount (Lug) is one of our most popular general-purpose mounts and is an excellent choice for hood, trunk or hatchback mounting! The mount includes a swivel that allows you to adjust the antenna angle, making it perfect for vehicles with a steep angle hood or hatchback. Fits virtually any vehicle with a straight 2" or shallower hood or trunk channel, and supports antennas up to 4' in length. Learn More -
Basic CB Quick Disconnect
$12.95An affordable solution for lightweight fiberglass antennas, this quick disconnect allows you to easily remove your antenna from your vehicle. No tools required: Simply push down and rotate, and your antenna is free! Recommended for fiberglass antennas up to 3' tall. Learn More -
Ford F250 & F350 CB Antenna Mount (1999 - 2009)
$24.95This stainless steel hood mount is a perfect choice for the owner of a 1999 to 2009 Ford F250 or F350. The mount attaches firmly to the hood rail on the driver side of the truck and can support antennas up to 4' tall. The mount includes a rust-resistant, stainless steel lug-style antenna stud that's compatible with ring or terminal end coax. Learn More -
Hummer CB Antenna Mount
$14.95Ideal for Hummer drivers, this stainless steel Firestik mount attaches to the inside groove of the factory roof rails for a clean install. Be sure to choose a terminal or ring-style coax cable, as there's not much space between the mount and the roof of the Hummer for installation. Learn More -
CB Molded Side Mount
$12.95This molded side mount is perfect for achieving a factory CB look. The mount's molded form makes the CB antenna look like a natural extension of the vehicle rather than an aftermarket accessory. This mount attaches to a vertical surface, accepts standard CB antenna threads, and is compatible with terminal-end coax cables. Learn More -
Chevy GMC CB Antenna Hood Mount (2010+)
$24.95If you want a factory look without taking a drill to your vehicle, the 2010+ GMC mount is ideal! This antenna hood mount is designed for 2010 and newer GMC/Chevy trucks, Chevy Avalanches, Tahoes, Suburbans, and will fit the Toyota Tacoma. The mount attaches securely to existing holes in the driver's side of the hood frame. Recommended for antennas up to 4' tall. Learn More -
Grabber Mount for CB Antennas
$29.95Workman's grabber mount is truly the Swiss army knife of CB antenna mounts! You can attach this mount to virtually anything with an exposed edge that the grabber's teeth can clamp onto. To tighten the mount, simply turn the triangle-shaped screw, and the teeth come together. The mount has a pre-drilled 1/2" hole to accommodate standard antenna studs. The stud surface rotates 90 degrees for use on vertical and horizontal clamping surfaces. Made from rust-resistant stainless steel, this mount is built to endure years of weather and abuse. Learn More -
Dodge CB Antenna Hood Mount Lug (1994-2003)
$12.95The perfect solution for 1994 to 2003 Dodge Ram and Dakota owners who want to mount their CB antennas on the hoods of their trucks! The mount uses the existing fender bolt to attach to the truck for a no-drill install and can be mounted on either the driver or passenger side. Includes a lug-style stud compatible with terminal or ring-style coax cable. Designed from rust-resistant stainless steel and recommended for antennas up to 4' tall. Learn More
Currently Shopping by
-
Includes Coax:: Mount Only
Shopping Options
- Price
- Product Type:
- Complete Kit (1)
- Antenna (1)
- Mount (60)
- Approximate Length:
- Mount Location:
- Hood / Fender (20)
- Flat Surface (Roof, Bumper) (14)
- Mirror / Bar (12)
- Vertical Surface / Side Mount (8)
- Trunk / Hatch (5)
- Other (23)
- Manufacturer:
- Includes Coax:
- Mount Only (61)
- Mount and Coax (15)
- Stud Type:
- PL-259 (Barrel) (22)
- Lug (Ring and Terminal) (27)
- No Stud (11)
- Material
- Stainless Steel (41)
- Aluminum (4)
- Powder Coated (5)
- Chrome (5)
- Other (4)