CB Radio Accessories

Our most popular SWR product, this SWR meter and coax package is perfect for CB users whose radios lack a built-in SWR meter. This meter provides basic SWR functions, making it a great choice for anyone with a stock radio. If you have any questions about how to tune your CB antenna, please see our CB antenna tuning guide!

Note: Meter may vary slightly from picture and/or video based on model and brand availability.

Learn More

This RG-58 CB coax is an affordable choice for basic CB installations. The outer shield layer is rated at 90% and helps reduce signal leakage and interference. Dual molded PL-259 connections allow you to connect a CB radio to any stud mount that accepts a PL-259-style coax connection. If your budget allows, we recommend upgrading to Firestik or RG8X coax cable that will provide less signal loss (resulting in better range) and will hold up better over time. Learn More

RG8X coax is a step up from standard RG-58 coaxial and is recommended for high-powered applications or users who simply want the best coax possible. A 95%+ shielding rating prevents signal leak and outside interference, resulting in longer transmission range and a clearer signal. The cable's hand-soldered, quality PL-259 ends are less likely to break or short than molded ends. Constructed a bit thicker than standard RG-58 cable, RG8X is recommended for situations where the coax may see higher-than-average wear or when a stouter cable is desired. If you want the best, the RG8X CB coax is your choice. Learn More

Speco's 5" ABS plastic PA speaker is perfect for CB users needing a small, affordable PA speaker that will withstand the elements. With a base that pivots 90 degrees, this speaker will fit almost any engine compartment. And its 15 watts of power will be easily heard over engine noise.

Learn More

This is our beefiest CB antenna spring -- the one you'll want if you're using a Monkey Made, Predator, 102" whip or similarly large, heavy antenna. This spring provides flexibility and protection to large antennas without any flopping and swaying. The spring's stainless steel construction is weather- and rust-resistant and designed to last. Learn More

Designed for CB antennas up to 5' tall, this heavy-duty spring will protect your antenna from snapping or bending. Built from stainless steel, this durable spring is rust- and weather-resistant. For antennas longer than 5', or for heavy center-load antennas, we recommend a super heavy-duty spring. Learn More

This premium disconnect is our best-selling CB disconnect and the one we recommend for general CB use! This Firestik CB disconnect makes removing your antenna fast and easy, which comes in handy in low-clearance areas. Simply push down and rotate, and your antenna pops off -- no tools required! Built with a stainless steel locking pin and spring, this accessory is designed to last. Recommended for fiberglass antennas up to 5' tall. Learn More

This Firestik stud mount is our best-selling stud and the one we recommend for general CB applications! Instead of low-cost components, Firestik uses stainless steel, machined brass and oversized hex stock for a high-quality stud that will last. The SO-239 connection is compatible with all PL-259 style coax connections. For best performance, we recommend using with antennas 5' and shorter. If you'll be using a longer antenna, you'll want to consider a ball mount or an oversized, heavy-duty stud. Learn More

The Astatic 636L Noise-Canceling Dynamic Microphone is a handy accessory for CB, amateur radio and SSB communications. The mic comes with Astatic's heavy-duty, 7.5' metal cord, and has a tailored frequency response system that provides maximum talk power. The noise-canceling feature effectively reduces wind and vehicle noise, while the durable construction ensures the mic will survive years of use. Compatible with all four-pin CB radios, including, Cobra, Uniden and Galaxy models. Learn More

The Firestik three-way mount is our most popular CB antenna mount due to its versatility and durability! The mounting clamp can be positioned horizontally or vertically for mirror arms and rails of either orientation. The back clamp can also be removed, converting the mount into an "L" bracket that can screwed into any vertical surface. Made from rust-resistant stainless steel, this Firestik product is well built and designed to last. If a strong mounting surface is available, these mounts will easily support antennas up to 5' tall. Learn More

This serves as a great backup or replacement microphone for your CB setup. The 9' mic cord gives you ease of movement throughout the cab.

Learn More

This 5-watt CB speaker is loud enough to increase the clarity of incoming transmissions, yet small enough to conveniently mount anywhere in the cab. Ideal for vehicles and environments where a CB's standard bottom-mounted speaker may not be easily heard, or for in-dash installations where the primary speaker is blocked.

Learn More

This premium extended-length RG8X coax is a step up from standard RG-58 coaxial and is recommended for high-powered applications or users who simply want the best coax possible. These extended lengths are often used for base station installations and long mobile applications. A 95%+ shielding rating prevents signal leak and outside interference, resulting in longer transmission range and a clearer signal. The cable's hand-soldered, quality PL-259 ends are less likely to break or short than molded ends. Constructed a bit thicker than standard RG-58 cable, RG8X is recommended for situations where the coax may see higher-than-average wear or when a stouter cable is desired. Available in 25', 50', 75' and 100' lengths. Learn More

Use the RG-58 coax cable when 18' just isn't enough! Our extended length CB coaxial is often used for base station installation and for long mobile applications, such as RVs and motor homes. This RG-58 coaxial is 90% shielded against signal loss and interference, and has dual molded PL-259 ends. Available in 25', 50', 75' and 100' lengths. Learn More

Pyramid power supplies are perfect when you want to use a mobile CB radio inside your house or outside your vehicle. If your radio and amplifier need a lot of power to operate, this 40-amp power supply is definitely for you.

Learn More

Pyramid power supplies give you the freedom to operate your mobile CB radio outside the vehicle. This power supply can handle 12-amp power and can be used to power cell phones,12V DC CB radios, scanners, ham radios and autosound systems.

Learn More

Enjoy the features of a 5-amp power supply with the convenience of a cigarette outlet. The cigarette lighter plug lets you power anything that runs off a 12V car cigarette lighter. Perfect for CB radios powered by a DC cigarette adapter.

Learn More

The Firestik K9 is a great choice if you want quality coax for your dual CB antennas. This RG-59 coax cable has a 95%+ shielding rating, which reduces signal loss and improves your effective transmission range. A stranded center conductor and polyvinyl insulation help the cable hold up against internal shorts and external wear. The cable is 18' long with two terminal ends that are compatible with lug-style studs, and side and ball mounts. Learn More

Achieve a low-profile, weather-resistant coax setup that's easy to install with this Firestik FireRing kit for dual antennas! The ring-style connections are perfectly suited for low-profile and tight installations, as they extend horizontally -- not vertically -- from the mounting surface. They're also significantly more weather-resistant than standard threaded PL-259 connections, which are built primarily from rust-prone metal. The FME (For Mobile Equipment) ends allows the PL-259s to unscrew, making installation, drilling and cable routing MUCH simpler, as the cable head diamater is reduced from 3/4" to 3/8". Built from RG-59 coax, the cable is 95% shielded for improved signal performance and uses a stranded center for increased durability. The coax is 18' long and includes two extra-long stud bolts to ensure compatibility with any CB stud. Learn More

Pyramid power supplies are perfect when you want to use a mobile CB radio outside the vehicle. This 2.5-amp power supply can power your cell phones, 12V DC CB radios, scanners and other electronics.

Learn More

Pyramid power supplies are perfect when you want to use a mobile CB radio outside a vehicle. Use this 5-amp power supply to power your CB radio using a standard household outlet.

Learn More

Compatible with virtually all CB radios, these replacement screw knobs attach your CB radio to the mounting bracket. Learn More

Perfect for midsize CB radios, this replacement radio bracket will fit the Cobra 25 and Uniden 68 series. Available in black. Learn More

This removable plug is great for CB users who want to power their CB radios through the DC power outlet. Compatible with all CB radios, the plug easily attaches to the CB's power wires. Ideal for those who want to use their CB radios in multiple vehicles.

Learn More